Quasi-In Situ EBSD Investigation of Variant Evolution and Twin Formation in a Hot Isostatic Pressing-Treated Additively-Manufactured Titanium Alloy Under Tensile Loading
Materials · 03.07.2025 · 18 (13) · 3169
DOI: 10.3390/ma18133169 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 03.07.2025. Verfasst von Fengli Zhu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of materials Science and Engineering, Nanjing Tech University, Nanjing 211816, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Sciences and Engineering Research Council, Natural Sciences and Engineering Research Council of Canada (NSERC).
Abstract (Originalsprache)
The advent of additive manufacturing (AM), also known as 3D printing, has revolutionized the production of titanium alloys, offering significant advantages in fabricating complex geometries with enhanced mechanical properties. This study investigates the variant-specific deformation mechanisms in HIP-treated TA15 (Ti-6.5Al-2Zr-1Mo-1V) titanium alloy, fabricated via selective electron beam melting (SEBM). The alloy exhibits a dual-phase (α+β) microstructure, where six distinct α variants are formed through the β→α phase transformation following the Burgers orientation relationship. Variant selection during AM leads to a non-uniform distribution of these α variants, with α6 (22.3%) dominating due to preferential growth. Analysis of the prismatic slip Schmid factor reveals that α4–α6 variants, with higher Schmid factors (>0.45), primarily undergo prismatic slip, while α1–α3 variants, with lower Schmid factors (
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of materials Science and Engineering, Nanjing Tech University, Nanjing 211816, China.
- School of Materials Science and Engineering, Tongji University, Shanghai 201804, China.
- Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China.
- Department of Mechanical, Industrial and Mechatronics Engineering, Toronto Metropolitan University, Toronto, ON M5B 2K3, Canada.
ORCID-Profile: Jiahong Liang, Aihan Feng, Hao Wang, Daolun Chen
Förderung
- National Natural Science Foundation of China
- Natural Sciences and Engineering Research Council
- Natural Sciences and Engineering Research Council of Canada (NSERC)
Zitieren
APA
Zhu, F., Liang, J., Cao, G., Feng, A., Wang, H., Qu, S., & Chen, D. (2025). Quasi-In Situ EBSD Investigation of Variant Evolution and Twin Formation in a Hot Isostatic Pressing-Treated Additively-Manufactured Titanium Alloy Under Tensile Loading. Materials, 18(13), 3169. https://doi.org/10.3390/ma18133169
Vancouver
Zhu F, Liang J, Cao G, Feng A, Wang H, Qu S, et al. Quasi-In Situ EBSD Investigation of Variant Evolution and Twin Formation in a Hot Isostatic Pressing-Treated Additively-Manufactured Titanium Alloy Under Tensile Loading. Materials. 2025;18(13):3169. doi:10.3390/ma18133169
BibTeX
@article{Zhu2025,
author = {Zhu, Fengli and Liang, Jiahong and Cao, Guojian and Feng, Aihan and Wang, Hao and Qu, Shoujiang and Chen, Daolun},
title = {Quasi-In Situ EBSD Investigation of Variant Evolution and Twin Formation in a Hot Isostatic Pressing-Treated Additively-Manufactured Titanium Alloy Under Tensile Loading},
journal = {Materials},
year = {2025},
volume = {18},
number = {13},
pages = {3169},
doi = {10.3390/ma18133169}
}
EUVIMED