EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fractographic Analysis and Fatigue Behavior of Additively Manufactured Ni‐Superalloy Components with Post Processing Heat Treatment and Hot Isostatic Pressing

David Sommer, Ben Truetsch, Cemal Esen, Ralf Hellmann

Advanced Engineering Materials · 2025-06 · 27 (12)

DOI: 10.1002/adem.202500078 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 03.03.2025. Verfasst von David Sommer und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A report is made on a study of mechanical properties and fractographic characteristics of laser powder bed fusion (PBF‐LB/M)‐built Inconel 718, performing heat treatments and hot‐isostatic pressing. For this, tensile components are heat‐treated by different processes, as namely stress relief (SR), SR and double aging (SR + DA), and hot‐isostatic pressing are conducted. For the mechanical testing, the ultimate tensile strength (UTS) as well as the fatigue behavior are evaluated, examining differences in maximum load behavior, elongation, and the different regimes of fatigue. As changes in material structure can be observed, the sole SR leads to a diminished UTS, while the combination of SR + DA develops an UTS of R m = 1277 MPa. Within the fatigue behavior, the HIP shows a very balanced material structure with an increased high cycle and very high cycle regime, as the texture gets homogenized during the heat treatment. The metallographic analysis can quantify the material changes, as the density and the hardness are improved by virtue of the heat treatments. Furthermore, the fractographic analysis shows the differences in fracture behavior, arising due to the microstructural changes, as crack initiation points, crack propagation, and forced fractures can be categorized by scanning electron microscopy.

Zitieren

APA

Sommer, D., Truetsch, B., Esen, C., & Hellmann, R. (2025). Fractographic Analysis and Fatigue Behavior of Additively Manufactured Ni‐Superalloy Components with Post Processing Heat Treatment and Hot Isostatic Pressing. Advanced Engineering Materials, 27(12). https://doi.org/10.1002/adem.202500078

Vancouver

Sommer D, Truetsch B, Esen C, Hellmann R. Fractographic Analysis and Fatigue Behavior of Additively Manufactured Ni‐Superalloy Components with Post Processing Heat Treatment and Hot Isostatic Pressing. Advanced Engineering Materials. 2025;27(12). doi:10.1002/adem.202500078

BibTeX
@article{Sommer2025,
  author = {Sommer, David and Truetsch, Ben and Esen, Cemal and Hellmann, Ralf},
  title = {Fractographic Analysis and Fatigue Behavior of Additively Manufactured Ni‐Superalloy Components with Post Processing Heat Treatment and Hot Isostatic Pressing},
  journal = {Advanced Engineering Materials},
  year = {2025},
  volume = {27},
  number = {12},
  doi = {10.1002/adem.202500078}
}
Kostenlos starten →