EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modelling and validation of hot isostatic pressing for additively manufactured FeSi-Inconel composites

Maksim A. Sitnikov, Julien Taurines, Matti Isakov, Suvi Santa-aho, Jukka Kuva, Matthew James Holcomb, Ira James Holcomb, Anouar Belahcen

The International Journal of Advanced Manufacturing Technology · 2025-12 · 141 (7-8) · 4361-4372

DOI: 10.1007/s00170-025-16889-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 12.11.2025. Verfasst von Maksim A. Sitnikov und 7 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Aalto University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explores the development of residual stresses in additively manufactured FeSi–Inconel 625 composites consolidated via hot isostatic pressing (HIP). Residual stress distributions were measured, and a finite element model (FEM) of the HIP process was developed to quantify the contribution of key mechanisms responsible for stress evolution. The model accounts for the mismatch in thermal expansion coefficients, thermal conductivities, and plastic deformation behaviour between the constituent materials. After validation against experimental data, the model was extended to simulate HIP consolidation of the individual materials. The results offer valuable insights into stress development during HIP and provide a framework for optimising the design and manufacturing of multi-material components.

Förderung

  • Aalto University

Zitieren

APA

Sitnikov, M. A., Taurines, J., Isakov, M., Santa-aho, S., Kuva, J., Holcomb, M. J., Holcomb, I. J., & Belahcen, A. (2025). Modelling and validation of hot isostatic pressing for additively manufactured FeSi-Inconel composites. The International Journal of Advanced Manufacturing Technology, 141(7-8), 4361-4372. https://doi.org/10.1007/s00170-025-16889-7

Vancouver

Sitnikov MA, Taurines J, Isakov M, Santa-aho S, Kuva J, Holcomb MJ, et al. Modelling and validation of hot isostatic pressing for additively manufactured FeSi-Inconel composites. The International Journal of Advanced Manufacturing Technology. 2025;141(7-8):4361-4372. doi:10.1007/s00170-025-16889-7

BibTeX
@article{Sitnikov2025,
  author = {Sitnikov, Maksim A. and Taurines, Julien and Isakov, Matti and Santa-aho, Suvi and Kuva, Jukka and Holcomb, Matthew James and Holcomb, Ira James and Belahcen, Anouar},
  title = {Modelling and validation of hot isostatic pressing for additively manufactured FeSi-Inconel composites},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2025},
  volume = {141},
  number = {7-8},
  pages = {4361--4372},
  doi = {10.1007/s00170-025-16889-7}
}
Kostenlos starten →