Additive Manufacturing of Alumina-Based Ceramic Structures by Vat Photopolymerization: A Review of Strategies for Improving Shaping Accuracy and Properties
Materials · 23.05.2025 · 18 (11) · 2445
DOI: 10.3390/ma18112445 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 23.05.2025. Verfasst von Jia-Jun Zhao und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 180 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R & D Program of China, National Key R & D Program of China.
Abstract (Originalsprache)
Alumina is a polycrystalline oxide ceramic with different structures. Currently, α-alumina with a hexagonal close-packed stacking structure is mainly used for a variety of industrial applications. Alumina-based ceramics and composites have been widely used in various fields due to their excellent hardness, strength, creep resistance and good biocompatibility. However, it is difficult for Al2O3 ceramic components based on traditional preparation methods to meet the increasing industrial requirements, especially for applications such as precise multi-walled complex structures. Al2O3 ceramic additive manufacturing by vat photopolymerization 3D printing stands out owing to its ability to produce complex structures and tailored shaping accuracy/properties. The vat photopolymerization 3D printing of Al2O3 ceramics requires multiple steps including slurry preparation, photopolymerization shaping, debinding and sintering. Therefore, many efforts mainly focus on the strategies of optimizing the ceramic slurry formulation and the debinding/sintering process. This paper provides a scoping review to present optimization strategies for the above aspects of vat photopolymerization 3D printing, which creates a strong reference for researchers to improve the accuracy and properties of alumina parts. Finally, this review also states the main applications of Al2O3 ceramic components based on vat photopolymerization, and highlights the opportunities and challenges associated with this technology in the future. It is beneficial to understanding the future trends and policy directions of advanced manufacturing industry.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China.
ORCID-Profile: Jia-Hu Ouyang
Förderung
- National Key R & D Program of China
- National Key R & D Program of China
Zitieren
APA
Zhao, J. J., Zhang, Y. Z., Li, J. H., Wang, Z. H., Miao, W. J., Wu, F. B., Wang, S. Q., & Ouyang, J. H. (2025). Additive Manufacturing of Alumina-Based Ceramic Structures by Vat Photopolymerization: A Review of Strategies for Improving Shaping Accuracy and Properties. Materials, 18(11), 2445. https://doi.org/10.3390/ma18112445
Vancouver
Zhao JJ, Zhang YZ, Li JH, Wang ZH, Miao WJ, Wu FB, et al. Additive Manufacturing of Alumina-Based Ceramic Structures by Vat Photopolymerization: A Review of Strategies for Improving Shaping Accuracy and Properties. Materials. 2025;18(11):2445. doi:10.3390/ma18112445
BibTeX
@article{Zhao2025,
author = {Zhao, Jia-Jun and Zhang, Yun-Zhuo and Li, Jia-Hao and Wang, Zi-Heng and Miao, Wei-Jian and Wu, Fan-Bin and Wang, Shu-Qi and Ouyang, Jia-Hu},
title = {Additive Manufacturing of Alumina-Based Ceramic Structures by Vat Photopolymerization: A Review of Strategies for Improving Shaping Accuracy and Properties},
journal = {Materials},
year = {2025},
volume = {18},
number = {11},
pages = {2445},
doi = {10.3390/ma18112445}
}
EUVIMED