EUVIMEDEUVIMED entdecken
Crossref

High‐Precision and High‐Strength Ceramic Micro‐Lattice via Vat Photopolymerization Additive Manufacturing

Keqiang Zhang, Wanyu Li, Zijian Zhang, Chunlei Wan

Journal of the American Ceramic Society · 2026-11 · 109 (11)

DOI: 10.1111/jace.71371 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 29.10.2026. Verfasst von Keqiang Zhang und 3 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Gefördert von: National Natural Science Foundation of China, China Postdoctoral Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Vat photopolymerization enables complex ceramic structures but struggles with precision and mechanical properties. Here, highly reactive ∼150 nm Al 2 O 3 nanopowder with carbon black additive was used to fabricate high‐strength ceramic micro‐lattices. Carbon black reduced light scattering, improving manufacturing precision and achieving ∼14 µm resolution with high shape fidelity. Sintering kinetics were investigated to correlate temperature with relative density and compressive strength of gyroid lattices. Systematic analysis of macro‐/microstructural evolution during sintering revealed that thermal radiation scattering by the highly reactive powder induces an asynchronous sintering between the interior and exterior surfaces, which delays full densification and shifts the peak mechanical performance to a higher temperature. Ultimately, I‐WP micro‐lattices with ∼ 44 µm wall thickness achieved a compressive strength of 103.7 ± 5.31 MPa. By demonstrating outstanding precision, mechanical performance, fine feature size, and small unit cell scale, this work establishes a benchmark for microscale additive manufacturing of ceramic structures, offering insights into both processing optimization and densification mechanisms.

Förderung

  • National Natural Science Foundation of China
  • China Postdoctoral Science Foundation

Zitieren

APA

Zhang, K., Li, W., Zhang, Z., & Wan, C. (2026). High‐Precision and High‐Strength Ceramic Micro‐Lattice via Vat Photopolymerization Additive Manufacturing. Journal of the American Ceramic Society, 109(11). https://doi.org/10.1111/jace.71371

Vancouver

Zhang K, Li W, Zhang Z, Wan C. High‐Precision and High‐Strength Ceramic Micro‐Lattice via Vat Photopolymerization Additive Manufacturing. Journal of the American Ceramic Society. 2026;109(11). doi:10.1111/jace.71371

BibTeX
@article{Zhang2026,
  author = {Zhang, Keqiang and Li, Wanyu and Zhang, Zijian and Wan, Chunlei},
  title = {High‐Precision and High‐Strength Ceramic Micro‐Lattice via Vat Photopolymerization Additive Manufacturing},
  journal = {Journal of the American Ceramic Society},
  year = {2026},
  volume = {109},
  number = {11},
  doi = {10.1111/jace.71371}
}
Kostenlos starten →