Vat Photopolymerization-Based Additive Manufacturing of Si3N4 Ceramic Structures: Printing Optimization, Debinding/Sintering, and Applications
Materials · 29.03.2025 · 18 (7) · 1556
DOI: 10.3390/ma18071556 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 29.03.2025. Verfasst von Zi-Heng Wang und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 165 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The National Key R & D Program of China, National Key R & D Program of China.
Abstract (Originalsprache)
Si3N4 ceramics and composites stand out for their exceptional mechanical and thermal properties. Compared with conventional ceramic forming processes, 3D printing via vat photopolymerization not only ensures high geometric precision but also improves the forming efficiency and strength of green body. Nevertheless, the grayish appearance of Si3N4 and its relatively high refractive index can adversely affect the photocuring behavior in ceramic slurries. The primary objectives focus on enhancing the curing performance and rheological properties of slurries, minimizing defects during post-processing, and improving the relative density and mechanical properties of Si3N4 ceramics. Key advancements include slurry optimization via refractive index matching, biomodal particle gradation and surface modification, while the integration of whisker/fiber additions or polymer-derived ceramic strategies enhances mechanical properties. In addition, controlling the atmosphere and heating rate of the post-processing innovations can achieve a relative density of more than 95%. This paper introduces the mechanisms of vat photopolymerization and then summarizes the strategies for improving Si3N4 ceramic slurries as well as controlling the printing and debinding/sintering processes. It further highlights the ways in which different approaches can be used to enhance the properties of Si3N4 slurries and ceramic parts. Finally, applications of Si3N4 ceramics and composites via vat photopolymerization in various fields such as aviation, aerospace, energy, electronics, chemical processes, and biomedical implants are also presented to point out future opportunities and challenges.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China.
ORCID-Profile: Jia-Hu Ouyang
Förderung
- The National Key R & D Program of China
- National Key R & D Program of China
Zitieren
APA
Wang, Z. H., Zhang, Y. Z., Miao, W. J., Wu, F. B., Wang, S. Q., Ouyang, J. H., Wang, Y. M., & Zou, Y. C. (2025). Vat Photopolymerization-Based Additive Manufacturing of Si3N4 Ceramic Structures: Printing Optimization, Debinding/Sintering, and Applications. Materials, 18(7), 1556. https://doi.org/10.3390/ma18071556
Vancouver
Wang ZH, Zhang YZ, Miao WJ, Wu FB, Wang SQ, Ouyang JH, et al. Vat Photopolymerization-Based Additive Manufacturing of Si3N4 Ceramic Structures: Printing Optimization, Debinding/Sintering, and Applications. Materials. 2025;18(7):1556. doi:10.3390/ma18071556
BibTeX
@article{Wang2025,
author = {Wang, Zi-Heng and Zhang, Yun-Zhuo and Miao, Wei-Jian and Wu, Fan-Bin and Wang, Shu-Qi and Ouyang, Jia-Hu and Wang, Ya-Ming and Zou, Yong-Chun},
title = {Vat Photopolymerization-Based Additive Manufacturing of Si3N4 Ceramic Structures: Printing Optimization, Debinding/Sintering, and Applications},
journal = {Materials},
year = {2025},
volume = {18},
number = {7},
pages = {1556},
doi = {10.3390/ma18071556}
}
EUVIMED