EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Accelerated Degradation on the Dimensions and Mechanical Performance of 3D-Printed PLA Parts Using Different Filament Manufacturing Techniques

Laura Castanon-Jano iD, Mario Lozano-Corona iD, Elena Blanco-Fernandez iD

Materials · 13.05.2025 · 18 (10) · 2267

DOI: 10.3390/ma18102267 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.05.2025. Verfasst von Laura Castanon-Jano und 2 weiteren Autor:innen. Beteiligte Einrichtung: Area of Manufacturing Processes, School of Industrial Engineering and Telecommunications, Universidad de Cantabria, 39005 Santander, Spain. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerio de Ciencia, Innovación y Universidades, Spanish Ministry of Science and Innovation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer 3D printing is popular due to its accessibility and low material waste. While commonly used in prototyping and medical applications, its potential for molds in complex concrete geometries, such as heritage reproductions or artificial reefs, remains underexplored. These applications require resistance to degradation from UV exposure, rain, and highly alkaline concrete (pH~13). This study evaluates the accelerated degradation of 3D-printed PLA specimens. Four PLA types were tested: virgin PLA extruded in the lab, commercial PLA, PLA with 50% metal powder, and PLA with encapsulated metal powder. Rectangular specimens were printed and tested under flexural loads following ISO-167 standards. Initially, their performance was assessed without exposure. Then, half of the specimens underwent UV and rain simulation, while the rest were immersed in an alkaline solution (pH 13, 50 °C). Dimensional changes and flexural strength were measured at five intervals. Exposure to an alkaline medium at 50 °C is more aggressive than UV radiation, limiting the lifespan of PLA formwork. Adding metal powder weakens PLA by 65% after 7 days, making it unsuitable. Printing defects accelerate degradation. Unmodified PLA is the best choice for concrete formwork, with commercial PLA and PLA from pellets showing nearly identical behavior.

Schlagwörter

Stichwörter der Autor:innen

3D printingUVadditivealkaline pHdegradationformworksmetalpolymers

Autor:innen und Institutionen

  • Area of Manufacturing Processes, School of Industrial Engineering and Telecommunications, Universidad de Cantabria, 39005 Santander, Spain.
  • GITECO Research Group, School of Civil Engineering, Universidad de Cantabria, 39005 Santander, Spain.

ORCID-Profile: Laura Castanon-Jano, Mario Lozano-Corona, Elena Blanco-Fernandez

Förderung

  • Ministerio de Ciencia, Innovación y Universidades
  • Spanish Ministry of Science and Innovation

Zitieren

APA

Castanon-Jano, L., Lozano-Corona, M., & Blanco-Fernandez, E. (2025). Effect of Accelerated Degradation on the Dimensions and Mechanical Performance of 3D-Printed PLA Parts Using Different Filament Manufacturing Techniques. Materials, 18(10), 2267. https://doi.org/10.3390/ma18102267

Vancouver

Castanon-Jano L, Lozano-Corona M, Blanco-Fernandez E. Effect of Accelerated Degradation on the Dimensions and Mechanical Performance of 3D-Printed PLA Parts Using Different Filament Manufacturing Techniques. Materials. 2025;18(10):2267. doi:10.3390/ma18102267

BibTeX
@article{CastanonJano2025,
  author = {Castanon-Jano, Laura and Lozano-Corona, Mario and Blanco-Fernandez, Elena},
  title = {Effect of Accelerated Degradation on the Dimensions and Mechanical Performance of 3D-Printed PLA Parts Using Different Filament Manufacturing Techniques},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {10},
  pages = {2267},
  doi = {10.3390/ma18102267}
}
Kostenlos starten →