EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of the Hydrolytic Degradation Kinetics of 3D-Printed PLA Structures under a Thermally Accelerated Regime

Bartłomiej Klimczuk, Aleksandra Rudnicka, Oliwia Owczarek iD, Adam K Puszkarz iD, Grzegorz Szparaga iD, Michał Puchalski iD

Materials · 24.02.2024 · 17 (5) · 1043

DOI: 10.3390/ma17051043 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 24.02.2024. Verfasst von Bartłomiej Klimczuk und 5 weiteren Autor:innen. Beteiligte Einrichtung: ECOResearch Student Research Group, Faculty of Material Technologies and Textile Design, Lodz University of Technology, 116 Zeromskiego Str., 90-924 …. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Regional Operational Programme for Lodz 2014-2020, Statutory activity by the Lodz University of Technology, Regional Operational Programme for Lodzkie 2014–2020.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The application of biobased and biodegradable polymers, such as polylactide (PLA), in fused deposition modeling (FDM) 3D-printing technology creates a new prospect for rapid prototyping and other applications in the context of ecology. The popularity of the FDM method and its significance in material engineering not only creates new prospects for the development of technical sciences on an industrial scale, but also introduces new technologies into households. In this study, the kinetics of the hydrolytic degradation of samples obtained by the FDM method from commercially available PLA filaments under a thermally accelerated regime were analyzed. The investigation was conducted at the microstructural, supramolecular, and molecular levels by using methods such as micro-computed tomography (micro-CT), wide-angle X-ray diffraction (WAXD), viscosimetry, and mass erosion measurements. The obtained results clearly present the rapid structural changes in 3D-printed materials during degradation due to their amorphous initial structure. The complementary studies carried out at different scale levels allowed us to demonstrate the relationship between the observed structural changes in the samples and the hydrolytic decomposition of the polymer chains, which made it possible to scientifically understand the process and expand the knowledge on biodegradation.

Schlagwörter

Stichwörter der Autor:innen

3D printingWAXDhydrolytic degradationkineticsmass erosionmicro-CTpolylactidethermal degradationviscosimetry

Autor:innen und Institutionen

  • ECOResearch Student Research Group, Faculty of Material Technologies and Textile Design, Lodz University of Technology, 116 Zeromskiego Str., 90-924 Lodz, Poland.
  • Division of Materials Science, Commodity Science and Textile Metrology, Textile Institute, Faculty of Material Technologies and Textile Design, Lodz University of Technology, 116 Zeromskiego Str., 90-924 Lodz, Poland.
  • Division of Technology of Yarns, Commodity Science and Textile Metrology, Textile Institute, Faculty of Material Technologies and Textile Design, Lodz University of Technology, 116 Zeromskiego Str., 90-924 Lodz, Poland.

ORCID-Profile: Oliwia Owczarek, Adam K Puszkarz, Grzegorz Szparaga, Michał Puchalski

Förderung

  • Regional Operational Programme for Lodz 2014-2020
  • Statutory activity by the Lodz University of Technology
  • Regional Operational Programme for Lodzkie 2014–2020

Zitieren

APA

Klimczuk, B., Rudnicka, A., Owczarek, O., Puszkarz, A. K., Szparaga, G., & Puchalski, M. (2024). Investigation of the Hydrolytic Degradation Kinetics of 3D-Printed PLA Structures under a Thermally Accelerated Regime. Materials, 17(5), 1043. https://doi.org/10.3390/ma17051043

Vancouver

Klimczuk B, Rudnicka A, Owczarek O, Puszkarz AK, Szparaga G, Puchalski M. Investigation of the Hydrolytic Degradation Kinetics of 3D-Printed PLA Structures under a Thermally Accelerated Regime. Materials. 2024;17(5):1043. doi:10.3390/ma17051043

BibTeX
@article{Klimczuk2024,
  author = {Klimczuk, Bartłomiej and Rudnicka, Aleksandra and Owczarek, Oliwia and Puszkarz, Adam K and Szparaga, Grzegorz and Puchalski, Michał},
  title = {Investigation of the Hydrolytic Degradation Kinetics of 3D-Printed PLA Structures under a Thermally Accelerated Regime},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {5},
  pages = {1043},
  doi = {10.3390/ma17051043}
}
Kostenlos starten →