Reducing Sintering Temperature While Optimizing Electrical Properties of BCZT-Based Lead-Free Ceramics by Adding MnO2 as Sintering Aid
Materials · 21.04.2025 · 18 (8) · 1888
DOI: 10.3390/ma18081888 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 21.04.2025. Verfasst von Xinlin Yang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Jiangsu Collaborative Innovation Center of Photovoltaic Science and Engineering, State Key Laboratory of…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Top-notch Academic Programs Project of Jiangsu Higher Education Institutions, Priority Academic Program Development of Jiangsu Higher Education Institutions, Top-Notch Academic Programs Project of the Jiangsu Higher Education Institutions and the Priority Academic Program Development of the Jiangsu Higher Education….
Abstract (Originalsprache)
In order to reduce the sintering temperature, MnO2 was used as a sintering aid to prepare [(Ba0.85Ca0.15)0.999(Dy0.5Tb0.5)0.001](Zr0.1Ti0.9)O3-x mol% MnO2 (BCDTZT-x mol% MnO2, x = 0.05, 0.2, 0.4, 0.6, 0.8, 1, 1.5, 3) lead-free piezoelectric ceramics in which the effects of the MnO2 doping amount and sintering temperature on the phase structure, sintering behavior, and electrical properties of the BCDTZT-x mol% MnO2 ceramics were systematically analyzed. All ceramics have a single perovskite structure and coexist in multiple phases. The optimal sintering temperature was reduced from 1515 °C to 1425 °C, and the density of all ceramics was increased as compared with the undoped ceramic, reaching a maximum of 5.38 g/cm3 at x = 0.8 mol%. An appropriate MnO2 doping amount of 0.4 mol% could effectively suppress oxygen vacancies and improve electrical properties, resulting in the best comprehensive performance of the ceramics, with a dielectric constant maximum of 12,817, a high piezoelectric constant of 330 pC/N, and good strain value (Smax = 0.118%) and low strain hysteresis (Hys = 2.66%). The calculation of activation energy indicated that the high-temperature conductivity was dominated by oxygen vacancies in all ceramics. The results showed that the appropriate introduction of MnO2 as a sintering aid could improve the performance of BCZT-based ceramics while reducing the sintering temperature, presenting high practical application value in the fields of low electric field sensors and actuators.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Jiangsu Collaborative Innovation Center of Photovoltaic Science and Engineering, State Key Laboratory of Photovoltaic Science and Technology, National Experimental Demonstrat…
- School of Mechanical Engineering, Yangzhou University, Yangzhou 225127, China.
ORCID-Profile: Bijun Fang, Shuai Zhang
Förderung
- Top-notch Academic Programs Project of Jiangsu Higher Education Institutions
- Priority Academic Program Development of Jiangsu Higher Education Institutions
- Top-Notch Academic Programs Project of the Jiangsu Higher Education Institutions and the Priority Academic Program Development of the Jiangsu Higher Education…
Zitieren
APA
Yang, X., Fang, B., Zhang, S., Lu, X., & Ding, J. (2025). Reducing Sintering Temperature While Optimizing Electrical Properties of BCZT-Based Lead-Free Ceramics by Adding MnO2 as Sintering Aid. Materials, 18(8), 1888. https://doi.org/10.3390/ma18081888
Vancouver
Yang X, Fang B, Zhang S, Lu X, Ding J. Reducing Sintering Temperature While Optimizing Electrical Properties of BCZT-Based Lead-Free Ceramics by Adding MnO2 as Sintering Aid. Materials. 2025;18(8):1888. doi:10.3390/ma18081888
BibTeX
@article{Yang2025,
author = {Yang, Xinlin and Fang, Bijun and Zhang, Shuai and Lu, Xiaolong and Ding, Jianning},
title = {Reducing Sintering Temperature While Optimizing Electrical Properties of BCZT-Based Lead-Free Ceramics by Adding MnO2 as Sintering Aid},
journal = {Materials},
year = {2025},
volume = {18},
number = {8},
pages = {1888},
doi = {10.3390/ma18081888}
}
EUVIMED