EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimizing Piezoelectric and Ferroelectric Properties in BCZT Ceramics via Nd/Mn Co-Doping and Sintering Engineering

Wenhao He, Shaohua Su, Bijun Fang, Shuai Zhang, Xiaolong Lu, Jianning Ding

Ceramics · 22.06.2026 · 9 (6) · 62

DOI: 10.3390/ceramics9060062 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ceramics, online erschienen am 22.06.2026. Verfasst von Wenhao He und 5 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Top-notch Academic Programs Project of Jiangsu Higher Education Institutions, Priority Academic Program Development of Jiangsu Higher Education Institutions.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lead-free [(Ba0.85Ca0.15)1−1.5xNdx][(Zr0.1Ti0.9)0.995Mn0.005]O3 (x mol% Nd/Mn BCZT, x = 0.05, 0.1, 0.5, 1 mol%) ceramics were prepared by the traditional solid-state reaction method, in which the synergistic effects of sintering temperature and Nd/Mn co-doping on the phase structure, microstructural evolution, and electrical properties were systematically investigated. All ceramics exhibit a pure perovskite structure, with the tetragonal (P4mm) phase dominating at room temperature as confirmed by the X-ray diffraction Rietveld refinement. The sintering temperature (1475–1520 °C) is found to be the primary factor governing densification and grain growth, with the relative density peaking at 91.7% for the x = 0.5 mol% sample sintered at 1505 °C. Within this optimized processing window, increasing the Nd content induces a gradual migration of the Curie temperature (TC) toward lower temperatures, accompanied by enhanced relaxor behavior. A highlight of this work is the strategic balance between piezoelectric activity and mechanical quality factor through a “donor–acceptor” co-doping mechanism. Specifically, for the x = 0.5 mol% ceramics, an exceptionally high mechanical quality factor (Qm = 424.5) is achieved for samples sintered at 1490 °C, which is proposed to be associated with the temperature-modulated formation of MnTi″−VO•• defect dipoles, while a peak inverse piezoelectric coefficient d33* of 685.1 pm/V is maintained at a sintering temperature of 1520 °C.

Förderung

  • Top-notch Academic Programs Project of Jiangsu Higher Education Institutions
  • Priority Academic Program Development of Jiangsu Higher Education Institutions

Zitieren

APA

He, W., Su, S., Fang, B., Zhang, S., Lu, X., & Ding, J. (2026). Optimizing Piezoelectric and Ferroelectric Properties in BCZT Ceramics via Nd/Mn Co-Doping and Sintering Engineering. Ceramics, 9(6), 62. https://doi.org/10.3390/ceramics9060062

Vancouver

He W, Su S, Fang B, Zhang S, Lu X, Ding J. Optimizing Piezoelectric and Ferroelectric Properties in BCZT Ceramics via Nd/Mn Co-Doping and Sintering Engineering. Ceramics. 2026;9(6):62. doi:10.3390/ceramics9060062

BibTeX
@article{He2026,
  author = {He, Wenhao and Su, Shaohua and Fang, Bijun and Zhang, Shuai and Lu, Xiaolong and Ding, Jianning},
  title = {Optimizing Piezoelectric and Ferroelectric Properties in BCZT Ceramics via Nd/Mn Co-Doping and Sintering Engineering},
  journal = {Ceramics},
  year = {2026},
  volume = {9},
  number = {6},
  pages = {62},
  doi = {10.3390/ceramics9060062}
}
Kostenlos starten →