EUVIMEDScopri EUVIMED
Open access · CC BY 4.0

The Scrapping Mechanism for the Corundum–Mullite Refractory Material in Rotary Kiln Incinerators

Zhunqin Dong, Zhongbing Wang, Zongwen Zhao, Yuxia Song iD

Materials · 2025-01-21 · 18 (3) · 470

DOI: 10.3390/ma18030470 ↗

At a glance

Journal article in Materials, published online on 2025-01-21. Written by Zhunqin Dong and 3 co-authors. Institution: School of Metallurgy and Environment, Central South University, Changsha 410083, China. Cited 9 times so far (Crossref); 59 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Natural Science Foundation of China, Jiangxi Provincial Natural Science Foundation.

AbstractSubjectsDati bibliograficiCiteRelated studies

Abstract (original language)

Corundum–mullite refractory material is an important material in rotary kiln incinerators due to its excellent properties, e.g., high temperature stability and chemical resistance, etc. However, in the process of use, the complexity of the sintering process will inevitably produce a large amount of spent corundum–mullite refractory material. Therefore, it is important to study the failure mechanism of corundum–mullite refractory material to prolong its service life. In this manuscript, the scrapping mechanism for the corundum–mullite refractory material was studied by XRD, XPS, SEM-EDS, FTIR, etc. The results indicate that chemical corrosion caused by impurity elements, such as Fe, Ca, Mg, Ti, etc., is one of the important scrapping mechanisms. The corundum structure remains stable throughout the service life, while mullite exhibits the opposite phenomenon. The Al-O-Si bonds in the mullite structure are depolymerized by impurity elements to release free tetrahedral structures, including the [AlO4] tetrahedron and [SiO4] tetrahedron. In the intervention of iron, the free tetrahedra, including [AlO4], [FeO4], and [SiO4] can bond with each other by sharing bridging oxygen (BO), probably forming Fe-O(BO)-Si, Fe-O(BO)-Al, and Al-O(BO)-Si in an Al2O3-SiO2-Fe2O3-MexOy (Me = Ca, Mg, Ti, etc.)-based amorphous phase. These findings provide theoretical support for prolonging the service life of refractory materials in rotary kiln incinerators.

Subjects

Author keywords

amorphous phasebridging oxygenchemical corrosioncorundum–mullite refractory material

Authors and institutions

  • School of Metallurgy and Environment, Central South University, Changsha 410083, China.
  • Shandong Humon Smelting Co., Ltd., Yantai 264109, China.
  • School of Environment and Chemical Engineering, Nanchang Hangkong University, Nanchang 330063, China.
  • College of Environmental Science and Engineering, Central South University of Forestry and Technology, Changsha 410007, China.

ORCID profiles: Yuxia Song

Funding

  • National Natural Science Foundation of China
  • Jiangxi Provincial Natural Science Foundation

Cite

APA

Dong, Z., Wang, Z., Zhao, Z., & Song, Y. (2025). The Scrapping Mechanism for the Corundum–Mullite Refractory Material in Rotary Kiln Incinerators. Materials, 18(3), 470. https://doi.org/10.3390/ma18030470

Vancouver

Dong Z, Wang Z, Zhao Z, Song Y. The Scrapping Mechanism for the Corundum–Mullite Refractory Material in Rotary Kiln Incinerators. Materials. 2025;18(3):470. doi:10.3390/ma18030470

BibTeX
@article{Dong2025,
  author = {Dong, Zhunqin and Wang, Zhongbing and Zhao, Zongwen and Song, Yuxia},
  title = {The Scrapping Mechanism for the Corundum–Mullite Refractory Material in Rotary Kiln Incinerators},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {3},
  pages = {470},
  doi = {10.3390/ma18030470}
}
Start for free →