EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Scrapping Mechanism for the Corundum–Mullite Refractory Material in Rotary Kiln Incinerators

Zhunqin Dong, Zhongbing Wang, Zongwen Zhao, Yuxia Song iD

Materials · 21.01.2025 · 18 (3) · 470

DOI: 10.3390/ma18030470 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.01.2025. Verfasst von Zhunqin Dong und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Metallurgy and Environment, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Jiangxi Provincial Natural Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Corundum–mullite refractory material is an important material in rotary kiln incinerators due to its excellent properties, e.g., high temperature stability and chemical resistance, etc. However, in the process of use, the complexity of the sintering process will inevitably produce a large amount of spent corundum–mullite refractory material. Therefore, it is important to study the failure mechanism of corundum–mullite refractory material to prolong its service life. In this manuscript, the scrapping mechanism for the corundum–mullite refractory material was studied by XRD, XPS, SEM-EDS, FTIR, etc. The results indicate that chemical corrosion caused by impurity elements, such as Fe, Ca, Mg, Ti, etc., is one of the important scrapping mechanisms. The corundum structure remains stable throughout the service life, while mullite exhibits the opposite phenomenon. The Al-O-Si bonds in the mullite structure are depolymerized by impurity elements to release free tetrahedral structures, including the [AlO4] tetrahedron and [SiO4] tetrahedron. In the intervention of iron, the free tetrahedra, including [AlO4], [FeO4], and [SiO4] can bond with each other by sharing bridging oxygen (BO), probably forming Fe-O(BO)-Si, Fe-O(BO)-Al, and Al-O(BO)-Si in an Al2O3-SiO2-Fe2O3-MexOy (Me = Ca, Mg, Ti, etc.)-based amorphous phase. These findings provide theoretical support for prolonging the service life of refractory materials in rotary kiln incinerators.

Schlagwörter

Stichwörter der Autor:innen

amorphous phasebridging oxygenchemical corrosioncorundum–mullite refractory material

Autor:innen und Institutionen

  • School of Metallurgy and Environment, Central South University, Changsha 410083, China.
  • Shandong Humon Smelting Co., Ltd., Yantai 264109, China.
  • School of Environment and Chemical Engineering, Nanchang Hangkong University, Nanchang 330063, China.
  • College of Environmental Science and Engineering, Central South University of Forestry and Technology, Changsha 410007, China.

ORCID-Profile: Yuxia Song

Förderung

  • National Natural Science Foundation of China
  • Jiangxi Provincial Natural Science Foundation

Zitieren

APA

Dong, Z., Wang, Z., Zhao, Z., & Song, Y. (2025). The Scrapping Mechanism for the Corundum–Mullite Refractory Material in Rotary Kiln Incinerators. Materials, 18(3), 470. https://doi.org/10.3390/ma18030470

Vancouver

Dong Z, Wang Z, Zhao Z, Song Y. The Scrapping Mechanism for the Corundum–Mullite Refractory Material in Rotary Kiln Incinerators. Materials. 2025;18(3):470. doi:10.3390/ma18030470

BibTeX
@article{Dong2025,
  author = {Dong, Zhunqin and Wang, Zhongbing and Zhao, Zongwen and Song, Yuxia},
  title = {The Scrapping Mechanism for the Corundum–Mullite Refractory Material in Rotary Kiln Incinerators},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {3},
  pages = {470},
  doi = {10.3390/ma18030470}
}
Kostenlos starten →