EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Building Orientation and Raster Angle on the Mechanical Properties of Selected Materials Used in FFF Techniques

Piotr Dziewit iD, Kamil Rajkowski iD, Paweł Płatek iD

Materials · 12.12.2024 · 17 (24) · 6076

DOI: 10.3390/ma17246076 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.12.2024. Verfasst von Piotr Dziewit und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechatronics, Armament and Aerospace, Military University of Technology, 2 Gen. S. Kaliskiego Street, 00-908 Warsaw, Poland. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Co-financed research project by Military University of Technology, Military University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Advances in the development of additive manufacturing materials (AM) and the low availability of studies on the impact response of AM specimens are the main reasons for this paper. Therefore, the influence of building orientation (vertical and horizontal) and the angle of the raster (15°/−75°, 30°/−60°, 45°/−45°, and 0°/90°) on the tensile and impact strength of AM specimens was investigated. The polylactic acid (PLA)-PolyMax, Mediflex and acrylonitrile-butadiene-styrene (ABS) filaments were chosen to provide a comprehensive characterization of AM materials with versatile mechanical properties. The experimental results of this study show that the tensile strength and toughness of PolyMax PLA specimens are comparable to ABS specimens, while Mediflex samples are characterized by their higher toughness, but lower impact force needed to break the samples. The Mediflex Charpy fracture surfaces exhibit a ductile character compared to those of brittle ABS and PLA. Furthermore, fracture surface morphology shows the allocation of voids, which helps us to understand differences in mechanical properties, and allows one to properly interpret the results of the geometrical accuracy of AM specimens with various printing settings.

Schlagwörter

Stichwörter der Autor:innen

ABSCharpy impact testFFFMediflexPLAadditive manufacturingbuilding orientationfractographyraster angletensile test

Autor:innen und Institutionen

  • Faculty of Mechatronics, Armament and Aerospace, Military University of Technology, 2 Gen. S. Kaliskiego Street, 00-908 Warsaw, Poland.

ORCID-Profile: Piotr Dziewit, Kamil Rajkowski, Paweł Płatek

Förderung

  • Co-financed research project by Military University of Technology
  • Military University of Technology

Zitieren

APA

Dziewit, P., Rajkowski, K., & Płatek, P. (2024). Effects of Building Orientation and Raster Angle on the Mechanical Properties of Selected Materials Used in FFF Techniques. Materials, 17(24), 6076. https://doi.org/10.3390/ma17246076

Vancouver

Dziewit P, Rajkowski K, Płatek P. Effects of Building Orientation and Raster Angle on the Mechanical Properties of Selected Materials Used in FFF Techniques. Materials. 2024;17(24):6076. doi:10.3390/ma17246076

BibTeX
@article{Dziewit2024,
  author = {Dziewit, Piotr and Rajkowski, Kamil and Płatek, Paweł},
  title = {Effects of Building Orientation and Raster Angle on the Mechanical Properties of Selected Materials Used in FFF Techniques},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {24},
  pages = {6076},
  doi = {10.3390/ma17246076}
}
Kostenlos starten →