Impact of Raster Angle on 3D Printing of Poly(Lactic Acid)/Thermoplastic Polyurethane Blends: Effects on Mechanical and Shape Memory Properties
Macromolecular Materials and Engineering · 2025-05 · 310 (5)
DOI: 10.1002/mame.202400427 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Materials and Engineering, online erschienen am 07.02.2025. Verfasst von Águeda Sonseca Olalla und 5 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Instituto de Salud Carlos III, Agència Valenciana de la Innovació.
Abstract (Originalsprache)
In this study, a 60:40 blend of poly(lactic acid) and thermoplastic polyurethane (PLA/TPU) is fabricated using fused material extrusion. The morphological, thermal, mechanical and thermoresponsive cyclic shape memory effect (SME) characteristics of 3D‐printed specimens at various raster angles are investigated. This work introduces the innovative utilization of TPU's fibrillar alignment within a PLA matrix to achieve enhanced mechanical anisotropy and consistent shape memory performance. Morphological analysis reveals excellent printability, with the immiscible TPU phase forming submicron‐diameter fibrils (≈0.78 ± µm) within the PLA matrix, leading to significant improvements in toughness and elongation at break when aligned with the printing direction and the load. Tensile test demonstrates anisotropy, with 0° raster specimens achieving a UTS of 16.1 ± 0.2 MPa and elongation at 305.5 ± 71.9%, compared to 4.5 ± 0.6 MPa and 10.8 ± 1.5% at 90°. Notably, despite the mechanical anisotropy, shape fixity ratios exceeded 95% and recovery ratios between 91 and 95% were achieved across all raster angles, demonstrating robustness in thermomechanical properties. These findings offer valuable insights into the relationship between morphology, mechanical characteristics, and shape memory behavior of PLA/TPU blends fabricated using fused material extrusion, positioning the material as a strong candidate for biomedical applications requiring precise shape recovery performance.
Förderung
- Instituto de Salud Carlos III
- Agència Valenciana de la Innovació
Zitieren
APA
Olalla, Á. S., Cerezo, J. L., Abarca, V. R., Soriano, L. R., Mazzinari, G., & Torres, E. G. (2025). Impact of Raster Angle on 3D Printing of Poly(Lactic Acid)/Thermoplastic Polyurethane Blends: Effects on Mechanical and Shape Memory Properties. Macromolecular Materials and Engineering, 310(5). https://doi.org/10.1002/mame.202400427
Vancouver
Olalla ÁS, Cerezo JL, Abarca VR, Soriano LR, Mazzinari G, Torres EG. Impact of Raster Angle on 3D Printing of Poly(Lactic Acid)/Thermoplastic Polyurethane Blends: Effects on Mechanical and Shape Memory Properties. Macromolecular Materials and Engineering. 2025;310(5). doi:10.1002/mame.202400427
BibTeX
@article{Olalla2025,
author = {Olalla, Águeda Sonseca and Cerezo, Joaquín Lluch and Abarca, Vicente Ruedas and Soriano, Lucas Rovira and Mazzinari, Guido and Torres, Enrique Giménez},
title = {Impact of Raster Angle on 3D Printing of Poly(Lactic Acid)/Thermoplastic Polyurethane Blends: Effects on Mechanical and Shape Memory Properties},
journal = {Macromolecular Materials and Engineering},
year = {2025},
volume = {310},
number = {5},
doi = {10.1002/mame.202400427}
}
EUVIMED