Effect of Artificial Saliva Modification on Corrosion Resistance of Metal Oxide Coatings on Co-Cr-Mo Dental Alloy
Materials · 23.10.2024 · 17 (21) · 5166
DOI: 10.3390/ma17215166 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 23.10.2024. Verfasst von Bożena Łosiewicz und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Materials Engineering, Faculty of Science and Technology, University of Silesia in Katowice, 75 Pułku Piechoty 1A, 41-500 Chorzów, Polan…. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 115 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Surface modifications not only improve the corrosion resistance of Co-Cr-Mo dental alloys (Bego Wirobond® C) but also ensure their long-term performance and reliability in dental applications. This paper describes the preparation of single-layer TiO2-ZrO2 sol–gel coatings on the Co-Cr-Mo dental alloy using the method of dip-coating. The TiO2-ZrO2 sol–gel coatings were sintered at 300 and 500 °C. SEM analysis shows that sintering at 300 °C produces a uniform, slightly dense structure without micro-cracks, while sintering at 500 °C results in a denser structure with micro-cracks due to higher stress and shrinkage. EDS confirms that sintering temperature affects the elemental composition of the coating, with higher temperatures causing the volatilization or diffusion of Ti and Zr. Roughness measurements indicate that the Ra value increases with the sintering temperature, meeting dental application requirements. Electrochemical measurements by open-circuit potential, EIS, and cyclic potentiodynamic curves demonstrate that sintering temperature and saliva composition affect corrosion resistance, with NaF and mouthwashes (Listerine Total Care Teeth Protection® and Meridol®) generally increasing charge transfer resistance and double-layer capacitance. The ceramic TiO2-ZrO2 coatings significantly reduce pitting corrosion susceptibility at physiological and acidic pH, with the 500 °C sintered coating showing better protective properties. These findings highlight the potential of TiO2-ZrO2 coatings in enhancing the performance of Co-Cr-Mo dental alloys.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Materials Engineering, Faculty of Science and Technology, University of Silesia in Katowice, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland.
- Department of Biomaterials and Experimental Dentistry, Poznan University of Medical Sciences, 60-812 Poznań, Poland.
ORCID-Profile: Bożena Łosiewicz, Patrycja Osak, Joanna Maszybrocka
Zitieren
APA
Łosiewicz, B., Osak, P., Górka-Kulikowska, K., & Maszybrocka, J. (2024). Effect of Artificial Saliva Modification on Corrosion Resistance of Metal Oxide Coatings on Co-Cr-Mo Dental Alloy. Materials, 17(21), 5166. https://doi.org/10.3390/ma17215166
Vancouver
Łosiewicz B, Osak P, Górka-Kulikowska K, Maszybrocka J. Effect of Artificial Saliva Modification on Corrosion Resistance of Metal Oxide Coatings on Co-Cr-Mo Dental Alloy. Materials. 2024;17(21):5166. doi:10.3390/ma17215166
BibTeX
@article{osiewicz2024,
author = {Łosiewicz, Bożena and Osak, Patrycja and Górka-Kulikowska, Karolina and Maszybrocka, Joanna},
title = {Effect of Artificial Saliva Modification on Corrosion Resistance of Metal Oxide Coatings on Co-Cr-Mo Dental Alloy},
journal = {Materials},
year = {2024},
volume = {17},
number = {21},
pages = {5166},
doi = {10.3390/ma17215166}
}
EUVIMED