Corrosion Resistance of Ti Coatings, Cr Coatings, and Ti/Cr Multilayer Coatings Prepared on 7050 Aluminum Alloy by Magnetron Sputtering
Coatings · 14.09.2025 · 15 (9) · 1077
DOI: 10.3390/coatings15091077 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 14.09.2025. Verfasst von Kang Chen und 7 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, International Cooperation Research Platform Construction Project of Shanghai University of Engineering Science, Ministry of Science and Higher Education of the Russian Federation for the IMP UB RAS.
Abstract (Originalsprache)
Al7050 aluminum alloy substrates were coated with Cr, Ti, and Ti/Cr multilayer films via direct current magnetron sputtering to enhance their corrosion resistance. A comprehensive analysis, employing SEM and XRD, characterized the coatings’ morphology and composition, while electrochemical experiments assessed their corrosion performance. The Cr coating, despite exhibiting the largest thickness (588 nm), revealed a porous microstructure with inherent structural weaknesses. Conversely, the Ti coating, while possessing a dense structure, presented a significantly reduced thickness (96 nm). The Ti/Cr multilayer coating, with a thickness of 242 nm, achieved an optimal balance between structural density and overall thickness. Critically, the layered architecture of the Ti/Cr multilayer coating effectively impeded crack propagation and facilitated the formation of tortuous corrosion pathways. This intricate pathway morphology significantly hindered the diffusion of the corrosive medium, resulting in a notably low corrosion current density of 3.83 × 10−7 A·cm−2. Comparative analysis revealed that the corrosion current density of the Ti/Cr multilayer coating was substantially lower than that of both the Cr and Ti coatings, demonstrating improvements of 2386% and 222%, respectively. These findings underscore the pivotal role of the multilayer structure in augmenting the corrosion resistance of aluminum alloys by providing a superior barrier to corrosive medium.
Förderung
- National Natural Science Foundation of China
- International Cooperation Research Platform Construction Project of Shanghai University of Engineering Science
- Ministry of Science and Higher Education of the Russian Federation for the IMP UB RAS
Zitieren
APA
Chen, K., He, T., Du, X., Okulov, A., Sotova, C., Ding, Y., Wang, Y., & He, P. (2025). Corrosion Resistance of Ti Coatings, Cr Coatings, and Ti/Cr Multilayer Coatings Prepared on 7050 Aluminum Alloy by Magnetron Sputtering. Coatings, 15(9), 1077. https://doi.org/10.3390/coatings15091077
Vancouver
Chen K, He T, Du X, Okulov A, Sotova C, Ding Y, et al. Corrosion Resistance of Ti Coatings, Cr Coatings, and Ti/Cr Multilayer Coatings Prepared on 7050 Aluminum Alloy by Magnetron Sputtering. Coatings. 2025;15(9):1077. doi:10.3390/coatings15091077
BibTeX
@article{Chen2025,
author = {Chen, Kang and He, Tao and Du, Xiangyang and Okulov, Artem and Sotova, Catherine and Ding, Yang and Wang, Yuqi and He, Peiyu},
title = {Corrosion Resistance of Ti Coatings, Cr Coatings, and Ti/Cr Multilayer Coatings Prepared on 7050 Aluminum Alloy by Magnetron Sputtering},
journal = {Coatings},
year = {2025},
volume = {15},
number = {9},
pages = {1077},
doi = {10.3390/coatings15091077}
}
EUVIMED