EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Aluminum Alloy Substrate Temperature on Microstructure and Corrosion Resistance of Cr/Ti Bilayer Coatings

Yuqi Wang, Tao He, Xiangyang Du, Alexey Vereschaka, Catherine Sotova, Yang Ding, Kang Chen, Jian Li, Peiyu He

Coatings · 01.08.2025 · 15 (8) · 891

DOI: 10.3390/coatings15080891 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 01.08.2025. Verfasst von Yuqi Wang und 8 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, International Cooperation Research Platform Construction Project of Shanghai University of Engineering Science.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cr/Ti bilayer coatings were deposited on 7050 aluminum alloy via magnetron sputtering at substrate temperatures of room temperature (RT), 150 °C, and 300 °C to investigate temperature effects on microstructure, hardness, and corrosion resistance. All coatings exhibited Cr(110) and Ti(002) phases. Temperature significantly modulated corrosion resistance by altering pore density, grain boundary density, and passivation film composition. Increasing temperature from RT to 150 °C raised corrosion rates primarily due to increased pore density. Further increasing to 300 °C reduced corrosion rates mainly through decreased grain boundary density, while passivation film composition changes altered electrochemical reaction kinetics. Substrate-coating interface defect density primarily influenced hardness with minimal effect on corrosion. Consequently, the RT-deposited coating, despite lower hardness, demonstrated optimal corrosion resistance: polarization resistance (7.17 × 104 Ω·cm2), charge transfer resistance (12,400 Ω·cm2), and corrosion current density (2.47 × 10−7 A/cm2), the latter being two orders of magnitude lower than the substrate.

Förderung

  • National Natural Science Foundation of China
  • International Cooperation Research Platform Construction Project of Shanghai University of Engineering Science

Zitieren

APA

Wang, Y., He, T., Du, X., Vereschaka, A., Sotova, C., Ding, Y., Chen, K., Li, J., & He, P. (2025). Influence of Aluminum Alloy Substrate Temperature on Microstructure and Corrosion Resistance of Cr/Ti Bilayer Coatings. Coatings, 15(8), 891. https://doi.org/10.3390/coatings15080891

Vancouver

Wang Y, He T, Du X, Vereschaka A, Sotova C, Ding Y, et al. Influence of Aluminum Alloy Substrate Temperature on Microstructure and Corrosion Resistance of Cr/Ti Bilayer Coatings. Coatings. 2025;15(8):891. doi:10.3390/coatings15080891

BibTeX
@article{Wang2025,
  author = {Wang, Yuqi and He, Tao and Du, Xiangyang and Vereschaka, Alexey and Sotova, Catherine and Ding, Yang and Chen, Kang and Li, Jian and He, Peiyu},
  title = {Influence of Aluminum Alloy Substrate Temperature on Microstructure and Corrosion Resistance of Cr/Ti Bilayer Coatings},
  journal = {Coatings},
  year = {2025},
  volume = {15},
  number = {8},
  pages = {891},
  doi = {10.3390/coatings15080891}
}
Kostenlos starten →