Development of the Low-Pressure Die Casting Process for an Aluminium Alloy Part
Materials · 10.06.2024 · 17 (12) · 2835
DOI: 10.3390/ma17122835 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 10.06.2024. Verfasst von Filipe Monteiro und 8 weiteren Autor:innen. Beteiligte Einrichtung: INEGI-Institute of Science and Innovation in Mechanical and Industrial Engineering, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: AM2R - Agenda Mobilizadora para a inovação empresarial do setor das Duas Rodas cofinanced by Plano de Recuperação e Resiliência (PRR), through the financial su…, AM2R-Agenda Mobilizadora para a inovação empresarial do setor das Duas Rodas.
Abstract (Originalsprache)
The low-pressure die casting (LPDC) process was experimentally and numerically studied to produce AlSi7Mg0.3 components such as steering knuckles. Steering knuckles are important safety components in the context of a vehicle’s suspension system, serving as the mechanical interface that facilitates the articulation of the steering to control the front wheel’s orientation, while simultaneously bearing the vertical load imposed by the vehicle’s weight. This work focuses on the development of a numerical model in ProCAST®, replicating the production of the aforementioned part. The model analyses parameters such as the filling dynamics, solidification process, and presence of shrinkage porosities. For the purpose of evaluating the quality of the castings, six parts were produced and characterised, both mechanically (tensile and hardness tests) and microstructurally (porosity and optical microscopy analysis). When correlating simulation results with the available experimental data, it is possible to conclude that the usage of the LPDC process is a viable alternative to the use of steels and other metals for the production of very high-quality castings while using lighter alloys such as aluminium and magnesium in more demanding applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- INEGI-Institute of Science and Innovation in Mechanical and Industrial Engineering, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal.
- Department of Mechanical Engineering, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal.
- FAB-Fundição de Alumínios de Braga, Parque Industrial Sobreposta, Lugar da Alagoa, Este (São Pedro e São Mamede), 4715-533 Braga, Portugal.
ORCID-Profile: Gonçalo Soares, Rui Madureira, Rui Pedro Silva, José Silva, Rui Amaral, Ana Reis
Förderung
- AM2R - Agenda Mobilizadora para a inovação empresarial do setor das Duas Rodas cofinanced by Plano de Recuperação e Resiliência (PRR), through the financial su…
- AM2R-Agenda Mobilizadora para a inovação empresarial do setor das Duas Rodas
Zitieren
APA
Monteiro, F., Soares, G., Madureira, R., Silva, R. P., Silva, J., Amaral, R., Neto, R., Reis, A., & Esteves, A. (2024). Development of the Low-Pressure Die Casting Process for an Aluminium Alloy Part. Materials, 17(12), 2835. https://doi.org/10.3390/ma17122835
Vancouver
Monteiro F, Soares G, Madureira R, Silva RP, Silva J, Amaral R, et al. Development of the Low-Pressure Die Casting Process for an Aluminium Alloy Part. Materials. 2024;17(12):2835. doi:10.3390/ma17122835
BibTeX
@article{Monteiro2024,
author = {Monteiro, Filipe and Soares, Gonçalo and Madureira, Rui and Silva, Rui Pedro and Silva, José and Amaral, Rui and Neto, Rui and Reis, Ana and Esteves, António},
title = {Development of the Low-Pressure Die Casting Process for an Aluminium Alloy Part},
journal = {Materials},
year = {2024},
volume = {17},
number = {12},
pages = {2835},
doi = {10.3390/ma17122835}
}
EUVIMED