EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of Heat Treatments for Structural Parts in Aluminium Alloys Produced by High-Pressure Die Casting (HPDC)

Rui Gomes, Gonçalo Soares, Rui Madureira, Rui Pedro Silva, José Silva, Rui Neto, Ana Reis, Cristina Fernandes

Metals · 16.09.2024 · 14 (9) · 1059

DOI: 10.3390/met14091059 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 16.09.2024. Verfasst von Rui Gomes und 7 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Project Hi-rEV—Recuperação do Setor de Componentes Automóveis, Plano de Recuperação e Resiliência (PRR), through NextGeneration EU.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, we intended to study the effect of heat treatments (T5 and flash T6) on blistering, mechanical properties and microstructure for different parts produced by vacuum-assisted HPDC. These parts were produced with primary and secondary aluminium alloys (AlSi10MnMg alloy and AlSi10Mg(Fe) alloy, respectively). The parts presented blisters for all combinations of temperature (between 360 °C and 520 °C) and stage times (15 and 30 min) of solution heat treatments. However, when subjected to the T5 heat treatment, blisters were no longer visible. With this heat treatment, there was an increase in yield strength of 64% for both aluminium alloys and an increase in UTS of 31% in AlSi10Mg(Fe) alloy and of 24% in AlSi10MnMg alloy, when compared to the mechanical properties in the as-cast state. However, there was a decrease in ductility. The AlSi10Mg(Fe) alloy presented a lot of contaminations (especially iron), which impaired the mechanical properties compared to the primary aluminium alloy, AlSi10MnMg.

Förderung

  • Project Hi-rEV—Recuperação do Setor de Componentes Automóveis
  • Plano de Recuperação e Resiliência (PRR), through NextGeneration EU

Zitieren

APA

Gomes, R., Soares, G., Madureira, R., Silva, R. P., Silva, J., Neto, R., Reis, A., & Fernandes, C. (2024). Development of Heat Treatments for Structural Parts in Aluminium Alloys Produced by High-Pressure Die Casting (HPDC). Metals, 14(9), 1059. https://doi.org/10.3390/met14091059

Vancouver

Gomes R, Soares G, Madureira R, Silva RP, Silva J, Neto R, et al. Development of Heat Treatments for Structural Parts in Aluminium Alloys Produced by High-Pressure Die Casting (HPDC). Metals. 2024;14(9):1059. doi:10.3390/met14091059

BibTeX
@article{Gomes2024,
  author = {Gomes, Rui and Soares, Gonçalo and Madureira, Rui and Silva, Rui Pedro and Silva, José and Neto, Rui and Reis, Ana and Fernandes, Cristina},
  title = {Development of Heat Treatments for Structural Parts in Aluminium Alloys Produced by High-Pressure Die Casting (HPDC)},
  journal = {Metals},
  year = {2024},
  volume = {14},
  number = {9},
  pages = {1059},
  doi = {10.3390/met14091059}
}
Kostenlos starten →