High-Pressure Die Casting (HPDC) Process Parameters Optimization for Al-Mg-Fe Aluminum Alloy Structural Parts Manufacturing
Metals · 24.09.2025 · 15 (10) · 1071
DOI: 10.3390/met15101071 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 24.09.2025. Verfasst von Mikel Merchán und 6 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union, Basque Government, Department of Economic Development, Sustainability and Environment of the Basque Government.
Abstract (Originalsprache)
The increasing adoption of High-Pressure Die Casting (HPDC) technology in the production of automotive body structure components is driven by its potential for efficiency and performance. This technology, however, involves complex physical phenomena with numerous parameters that significantly influence casting quality. In this study, three key die casting parameters—plunger or shot speed, vacuum application, and intensification pressure (IP)—have been evaluated following a Design of Experiment (DoE) approach. The results demonstrate that IP application is instrumental in reducing porosity within the cast specimens, thereby enhancing their mechanical strength and elongation. Furthermore, the combined application of vacuum and IP yields further improvements in elongation by minimizing porosity. These findings are particularly relevant for silicon-free alloys, which eliminate the need for post-casting heat treatments to achieve the required mechanical properties. By optimizing HPDC processes, manufacturers can reduce rejection rates, lower production costs, and improve the overall efficiency of their operations, contributing to the production of high-quality and cost-effective components for the automotive industry.
Förderung
- European Union
- Basque Government
- Department of Economic Development, Sustainability and Environment of the Basque Government
Zitieren
APA
Merchán, M., Pascual, A., Jiménez, A., García, J. C., Anglada, E., Galarraga, H., & Ortega, N. (2025). High-Pressure Die Casting (HPDC) Process Parameters Optimization for Al-Mg-Fe Aluminum Alloy Structural Parts Manufacturing. Metals, 15(10), 1071. https://doi.org/10.3390/met15101071
Vancouver
Merchán M, Pascual A, Jiménez A, García JC, Anglada E, Galarraga H, et al. High-Pressure Die Casting (HPDC) Process Parameters Optimization for Al-Mg-Fe Aluminum Alloy Structural Parts Manufacturing. Metals. 2025;15(10):1071. doi:10.3390/met15101071
BibTeX
@article{Merchn2025,
author = {Merchán, Mikel and Pascual, Alejandro and Jiménez, Ane and García, José Carlos and Anglada, Eva and Galarraga, Haize and Ortega, Naiara},
title = {High-Pressure Die Casting (HPDC) Process Parameters Optimization for Al-Mg-Fe Aluminum Alloy Structural Parts Manufacturing},
journal = {Metals},
year = {2025},
volume = {15},
number = {10},
pages = {1071},
doi = {10.3390/met15101071}
}
EUVIMED