EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Finite Element Analysis of Manufacturing Deformation in Polymer Matrix Composites

Thomas Singleton iD, Adil Saeed iD, Lloyd Strawbridge, Zulfiqar Ahmad Khan iD

Materials · 09.05.2024 · 17 (10) · 2228

DOI: 10.3390/ma17102228 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.05.2024. Verfasst von Thomas Singleton und 3 weiteren Autor:innen. Beteiligte Einrichtung: NanoCorr, Energy & Modelling (NCEM) Research Group, Bournemouth University, Poole BH12 5BB, UK. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper introduces a unique finite element analysis (FEA) technique designed to predict elastic response in polymer matrix composites (PMCs). Extensive research has been conducted to model the manufacturing process of multiple ‘L’-shaped components, fabricated from SPRINTTM materials (GLP 43 and GLP 96) at two thicknesses (15 mm and 25 mm). Three distinct FEA methodologies were utilised to determine the impact of thermal loads and rigid fixtures. An error deviation of 3.23% was recorded when comparing simulation results to experimental data, thereby validating the effectiveness of the FEA methodology.

Schlagwörter

Stichwörter der Autor:innen

compositeselastic responsefinite element analysislaminatesmatrixpolymerpressurestressvacuum

Autor:innen und Institutionen

  • NanoCorr, Energy & Modelling (NCEM) Research Group, Bournemouth University, Poole BH12 5BB, UK.
  • Tods Technology, Wide Street, Portland DT5 2JP, UK.

ORCID-Profile: Thomas Singleton, Adil Saeed, Zulfiqar Ahmad Khan

Zitieren

APA

Singleton, T., Saeed, A., Strawbridge, L., & Khan, Z. A. (2024). Finite Element Analysis of Manufacturing Deformation in Polymer Matrix Composites. Materials, 17(10), 2228. https://doi.org/10.3390/ma17102228

Vancouver

Singleton T, Saeed A, Strawbridge L, Khan ZA. Finite Element Analysis of Manufacturing Deformation in Polymer Matrix Composites. Materials. 2024;17(10):2228. doi:10.3390/ma17102228

BibTeX
@article{Singleton2024,
  author = {Singleton, Thomas and Saeed, Adil and Strawbridge, Lloyd and Khan, Zulfiqar Ahmad},
  title = {Finite Element Analysis of Manufacturing Deformation in Polymer Matrix Composites},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {10},
  pages = {2228},
  doi = {10.3390/ma17102228}
}
Kostenlos starten →