Pre-Impregnated Powder Coatings with a Thermoplastic Matrix for Use in Fibre-Reinforced Polymer Sandwich Composites: Manufacturing, Mechanical Testing and Finite Element Modelling
Materials · 18.09.2026 · 19 (18) · 3972
DOI: 10.3390/ma19183972 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 18.09.2026. Verfasst von Przemysław Golewski und 1 weiteren Autor:innen. Beteiligte Einrichtung: Group of Solid State Mechanics, Department of Roads and Bridges, Faculty of Civil Engineering and Architecture, Lublin University of Technology, Nadb…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Centre for Research and Development, National Centre for Research and Development of Poland.
Abstract (Originalsprache)
This study presents a manufacturing route for pre-impregnated functional powder coatings (PCs) intended for fibre-reinforced polymer (FRP) composites, including vacuum-infused sandwich structures. PCs comprising powder, thermoplastic nonwoven and twill glass fabric were produced by a two-stage heat-pressing process. Ceramic, mineral and metallic powders were investigated. Uniaxial tensile tests with digital image correlation and three-point bending tests of PC-integrated sandwich composites were supported by finite element analyses of representative volume elements. Powder layers were parametrically generated in CadQuery for F24, F30 and F36 grains with ellipsoidal or sharp-edged geometries. The powder and thermoplastic layers markedly affected tensile stiffness and deformation. Apparent Young’s moduli ranged from 3.8 to 8.1 GPa, compared with 11.7–14.3 GPa for reference specimens. Manufacturing-induced curvature and an atypical transverse response were attributed to the asymmetric layered architecture. All sandwich variants reached similar maximum bending loads of 0.93–0.96 kN, while absorbed energy ranged from 7.2 to 9.1 J. RVE simulations showed that grain size affected local stress, strain and displacement fields. The method enables repeatable manufacture of thin, modular functional layers and their integration with composites without applying loose powder during moulding.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Group of Solid State Mechanics, Department of Roads and Bridges, Faculty of Civil Engineering and Architecture, Lublin University of Technology, Nadbystrzycka 40 Str., 20-618 Lublin, Poland.
- Laboratory of Civil Engineering, Faculty of Civil Engineering and Architecture, Lublin University of Technology, Nadbystrzycka 40 Str., 20-618 Lublin, Poland.
ORCID-Profile: Przemysław Golewski, Michał Budka
Förderung
- National Centre for Research and Development
- National Centre for Research and Development of Poland
Zitieren
APA
Golewski, P., & Budka, M. (2026). Pre-Impregnated Powder Coatings with a Thermoplastic Matrix for Use in Fibre-Reinforced Polymer Sandwich Composites: Manufacturing, Mechanical Testing and Finite Element Modelling. Materials, 19(18), 3972. https://doi.org/10.3390/ma19183972
Vancouver
Golewski P, Budka M. Pre-Impregnated Powder Coatings with a Thermoplastic Matrix for Use in Fibre-Reinforced Polymer Sandwich Composites: Manufacturing, Mechanical Testing and Finite Element Modelling. Materials. 2026;19(18):3972. doi:10.3390/ma19183972
BibTeX
@article{Golewski2026,
author = {Golewski, Przemysław and Budka, Michał},
title = {Pre-Impregnated Powder Coatings with a Thermoplastic Matrix for Use in Fibre-Reinforced Polymer Sandwich Composites: Manufacturing, Mechanical Testing and Finite Element Modelling},
journal = {Materials},
year = {2026},
volume = {19},
number = {18},
pages = {3972},
doi = {10.3390/ma19183972}
}
EUVIMED