A Study of 2D Roughness Periodical Profiles on a Flat Surface Generated by Milling with a Ball Nose End Mill
Materials · 20.03.2024 · 17 (6) · 1425
DOI: 10.3390/ma17061425 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 20.03.2024. Verfasst von Mihaita Horodinca und 5 weiteren Autor:innen. Beteiligte Einrichtung: Digital Manufacturing Systems Department, Gheorghe Asachi Technical University of Iasi, 700050 Iasi, Romania. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Gheorghe Asachi Technical University of Iasi, Romania.
Abstract (Originalsprache)
This paper presents a study of 2D roughness profiles on a flat surface generated on a steel workpiece by ball nose end milling with linear equidistant tool paths (pick-intervals). The exploration of the milled surface with a surface roughness tester (on the pick and feed directions) produces 2D roughness profiles that usually have periodic evolutions. These evolutions can be considered as time-dependent signals, which can be described as a sum of sinusoidal components (the wavelength of each component is considered as a period). In order to obtain a good approximate description of these sinusoidal components, two suitable signal processing techniques are used in this work: the first technique provides a direct mathematical (analytical) description and is based on computer-aided curve (signal) fitting (more accurate); the second technique (synthetic, less accurate, providing an indirect and incomplete description) is based on the spectrum generated by fast Fourier transform. This study can be seen as a way to better understand the interaction between the tool and the workpiece or to achieve a mathematical characterisation of the machined surface microgeometry in terms of roughness (e.g., its description as a collection of closely spaced 2D roughness profiles) and to characterise the workpiece material in terms of machinability by cutting.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Digital Manufacturing Systems Department, Gheorghe Asachi Technical University of Iasi, 700050 Iasi, Romania.
ORCID-Profile: Catalin Gabriel Dumitras, Dragos-Florin Chitariu
Förderung
- Gheorghe Asachi Technical University of Iasi, Romania
Zitieren
APA
Horodinca, M., Chifan, F., Paduraru, E., Dumitras, C. G., Munteanu, A., & Chitariu, D. F. (2024). A Study of 2D Roughness Periodical Profiles on a Flat Surface Generated by Milling with a Ball Nose End Mill. Materials, 17(6), 1425. https://doi.org/10.3390/ma17061425
Vancouver
Horodinca M, Chifan F, Paduraru E, Dumitras CG, Munteanu A, Chitariu DF. A Study of 2D Roughness Periodical Profiles on a Flat Surface Generated by Milling with a Ball Nose End Mill. Materials. 2024;17(6):1425. doi:10.3390/ma17061425
BibTeX
@article{Horodinca2024,
author = {Horodinca, Mihaita and Chifan, Florin and Paduraru, Emilian and Dumitras, Catalin Gabriel and Munteanu, Adriana and Chitariu, Dragos-Florin},
title = {A Study of 2D Roughness Periodical Profiles on a Flat Surface Generated by Milling with a Ball Nose End Mill},
journal = {Materials},
year = {2024},
volume = {17},
number = {6},
pages = {1425},
doi = {10.3390/ma17061425}
}
EUVIMED