Surface Quality Evaluation in the Milling Process Using a Ball Nose End Mill
Applied Sciences · 15.09.2023 · 13 (18) · 10328
DOI: 10.3390/app131810328 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 15.09.2023. Verfasst von Ján Varga und 5 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Science, Research and Sport of the Slovak Republic.
Abstract (Originalsprache)
Shaped surfaces are increasingly used in the field of mold-making for casting or injection molding, where future products include shapes with different curvatures. These are surfaces that form convex curves, concave curves, or a combination thereof. Given these machined surfaces, it is important to know the impact of the finishing strategies on these surfaces. This paper deals with the comparison of finishing milling strategies in the production of shaped surfaces and the analysis of different methods for the evaluation of surface topography. In addition, the experimental results evaluate the roughness of the machined surface and surface shape variations. The material used for the experiments was AlCu4Mg aluminum alloy, and Constant Z, spiral and spiral circle strategies were chosen for the finishing strategies. The evaluation of surface topography and surface roughness was carried out at three different specimen heights with respect to the tool’s contact with the machined surface.
Förderung
- Ministry of Education, Science, Research and Sport of the Slovak Republic
Zitieren
APA
Varga, J., Ižol, P., Vrabeľ, M., Kaščák, Ľ., Drbúl, M., & Brindza, J. (2023). Surface Quality Evaluation in the Milling Process Using a Ball Nose End Mill. Applied Sciences, 13(18), 10328. https://doi.org/10.3390/app131810328
Vancouver
Varga J, Ižol P, Vrabeľ M, Kaščák Ľ, Drbúl M, Brindza J. Surface Quality Evaluation in the Milling Process Using a Ball Nose End Mill. Applied Sciences. 2023;13(18):10328. doi:10.3390/app131810328
BibTeX
@article{Varga2023,
author = {Varga, Ján and Ižol, Peter and Vrabeľ, Marek and Kaščák, Ľuboš and Drbúl, Mário and Brindza, Jozef},
title = {Surface Quality Evaluation in the Milling Process Using a Ball Nose End Mill},
journal = {Applied Sciences},
year = {2023},
volume = {13},
number = {18},
pages = {10328},
doi = {10.3390/app131810328}
}
EUVIMED