Bio-Composite Filaments Based on Poly(Lactic Acid) and Cocoa Bean Shell Waste for Fused Filament Fabrication (FFF): Production, Characterization and 3D Printing
Materials · 08.03.2024 · 17 (6) · 1260
DOI: 10.3390/ma17061260 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 08.03.2024. Verfasst von Daniela Fico und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering for Innovation, University of Salento, Edificio P, Campus Ecotekne, s.p. 6 Lecce-Monteroni, 73100 Lecce, Italy. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Universities and Research, Ministero dell’Istruzione dell’Università e della Ricerca.
Abstract (Originalsprache)
In this study, novel biocomposite filaments incorporating cocoa bean shell waste (CBSW) and poly(lactic acid) (PLA) were formulated for application in Fused Filament Fabrication (FFF) technology. CBSW, obtained from discarded chocolate processing remnants, was blended with PLA at concentrations of 5 and 10 wt.% to address the challenge of waste material disposal while offering eco-friendly composite biofilaments for FFF, thereby promoting resource conservation and supporting circular economy initiatives. A comprehensive analysis encompassing structural, morphological, thermal, and mechanical assessments of both raw materials and resultant products (filaments and 3D printed bars) was conducted. The findings reveal the presence of filler aggregates only in high concentrations of CBSW. However, no significant morphological or thermal changes were observed at either CBSW concentration (5 wt.% and 10 wt.%) and satisfactory printability was achieved. In addition, tensile tests on the 3D printed objects showed improved stiffness and load resistance in these samples at the highest CBSW concentrations. In addition, to demonstrate their practical application, several 3D prototypes (chocolate-shaped objects) were printed for presentation in the company’s shop window as a chocolate alternative; while retaining the sensory properties of the original cocoa, the mechanical properties were improved compared to the base raw material. Future research will focus on evaluating indicators relevant to the preservation of the biocomposite’s sensory properties and longevity.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Engineering for Innovation, University of Salento, Edificio P, Campus Ecotekne, s.p. 6 Lecce-Monteroni, 73100 Lecce, Italy.
- Italian National Council of Research-Institute of Heritage Sciences (CNR-ISPC), Campus Ecotekne, 73100 Lecce, Italy.
- Department of Cultural Heritage, University of Salento, Via D. Birago 64, 73100 Lecce, Italy.
ORCID-Profile: Daniela Fico, Daniela Rizzo, Carola Esposito Corcione
Förderung
- Ministry of Education, Universities and Research
- Ministero dell’Istruzione dell’Università e della Ricerca
Zitieren
APA
Fico, D., Rizzo, D., De Carolis, V., & Esposito Corcione, C. (2024). Bio-Composite Filaments Based on Poly(Lactic Acid) and Cocoa Bean Shell Waste for Fused Filament Fabrication (FFF): Production, Characterization and 3D Printing. Materials, 17(6), 1260. https://doi.org/10.3390/ma17061260
Vancouver
Fico D, Rizzo D, De Carolis V, Esposito Corcione C. Bio-Composite Filaments Based on Poly(Lactic Acid) and Cocoa Bean Shell Waste for Fused Filament Fabrication (FFF): Production, Characterization and 3D Printing. Materials. 2024;17(6):1260. doi:10.3390/ma17061260
BibTeX
@article{Fico2024,
author = {Fico, Daniela and Rizzo, Daniela and De Carolis, Valentina and Esposito Corcione, Carola},
title = {Bio-Composite Filaments Based on Poly(Lactic Acid) and Cocoa Bean Shell Waste for Fused Filament Fabrication (FFF): Production, Characterization and 3D Printing},
journal = {Materials},
year = {2024},
volume = {17},
number = {6},
pages = {1260},
doi = {10.3390/ma17061260}
}
EUVIMED