EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tensile properties of 3D-printed PLA prismatic cellular structures: an experimental investigation

Hashim Khan, Muftooh ur Rehman Siddiqi, Saim Saher, Riaz Muhammad, Muhammad Saad Rehan

The International Journal of Advanced Manufacturing Technology · 2024-10 · 134 (9-10) · 4399-4410

DOI: 10.1007/s00170-024-14343-8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 11.09.2024. Verfasst von Hashim Khan und 4 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Advancements in additive manufacturing have significantly increased the use of cellular structures in product development, especially in the automotive, aerospace, and biomedical industries, due to their enhanced strength-to-weight ratio and energy-absorbing capabilities. This study investigates the tensile properties of 3D-printed PLA prismatic cellular structures, focusing on the effects of fillet radius, wall thickness, and cell size on tensile strength, Young’s modulus, and strength-to-weight ratio. Using a full factorial design and ANOVA, we examined the impact and interaction of each geometrical parameter. Our findings show that triangular cellular structures exhibit a higher stiffness of 1.36 GPa and tensile strength of 24.28 MPa, resulting in a notable 5.78 MPa/gram strength-to-weight ratio. Increasing cell count and wall thickness enhances both tensile strength and Young’s modulus, whereas adding fillet radii at corners reduces these properties. Fracture behaviors are influenced by geometrical design: shorter, thicker walls lead to progressive crack propagation, while longer, thinner walls tend to fail catastrophically. Fillet radius introduction shifts the fracture initiation point from the nodes. ANOVA results indicate that wall thickness and cell size significantly affect tensile strength and Young’s modulus, contributing 36.53% and 53.54%, respectively.

Zitieren

APA

Khan, H., Siddiqi, M. U. R., Saher, S., Muhammad, R., & Rehan, M. S. (2024). Tensile properties of 3D-printed PLA prismatic cellular structures: an experimental investigation. The International Journal of Advanced Manufacturing Technology, 134(9-10), 4399-4410. https://doi.org/10.1007/s00170-024-14343-8

Vancouver

Khan H, Siddiqi MUR, Saher S, Muhammad R, Rehan MS. Tensile properties of 3D-printed PLA prismatic cellular structures: an experimental investigation. The International Journal of Advanced Manufacturing Technology. 2024;134(9-10):4399-4410. doi:10.1007/s00170-024-14343-8

BibTeX
@article{Khan2024,
  author = {Khan, Hashim and Siddiqi, Muftooh ur Rehman and Saher, Saim and Muhammad, Riaz and Rehan, Muhammad Saad},
  title = {Tensile properties of 3D-printed PLA prismatic cellular structures: an experimental investigation},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2024},
  volume = {134},
  number = {9-10},
  pages = {4399--4410},
  doi = {10.1007/s00170-024-14343-8}
}
Kostenlos starten →