EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of Homogenization Heat Treatment on 316L Stainless Steel Cast Billet

Hung-Yang Chu, Ren-Kae Shiue iD, Sheng-Yuan Cheng

Materials · 31.12.2023 · 17 (1) · 232

DOI: 10.3390/ma17010232 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 31.12.2023. Verfasst von Hung-Yang Chu und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, National Taiwan University, Taipei 10617, Taiwan. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Walsin Lihwa Corporation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This investigation aims to analyze the effect of homogenization heat treatment at 1240 °C for 2 and 6 h on the hardness, distribution, morphology, and chemical composition of the δ-ferrite and sigma phases in 316L stainless steel cast billet. A field emission scanning electron microscope, combined with electron back-scattered diffraction, a field emission electron probe microanalyzer with a wavelength dispersive spectrometer, and a Vickers microhardness tester are applied to identify various phase evolutions in the cast billet. The morphology of the δ-ferrite and sigma phases in the austenite matrix of the 316L cast billet are strongly related to the subsequent hot and cold wire drawings. The homogenization heat treatment is expected to provide a driving force to form spheroid interdendritic δ-ferrite and to minimize the amount of the brittle sigma intermetallic compound in the austenite matrix. The homogenization heat treatment at 1240 °C effectively spheroidized all δ-ferrites into blunt ones in the cast billet. The transformation of δ-ferrite into sigma is dominated by temperature and cooling rate. The fast air cooling after homogenization between 1240 and 850 °C retards the precipitation of the sigma in the δ-ferrite. There are two δ-ferrite transformation mechanisms in this experiment. The direct transformation of the δ-ferrite into sigma is observed in the as-cast 316L stainless steel billet. In contrast, the eutectoid transformation of the δ-ferrite into the sigma and austenite dominates the 316L cast billet homogenized at 1240 °C, with a slow furnace cooling rate.

Schlagwörter

Stichwörter der Autor:innen

cast billethomogenizationsigma phasestainless steelwire drawingδ-ferrite

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, National Taiwan University, Taipei 10617, Taiwan.
  • Stainless Steel Business Group, Walsin Lihwa Co., Tainan City 73743, Taiwan.

ORCID-Profile: Ren-Kae Shiue

Förderung

  • Walsin Lihwa Corporation

Zitieren

APA

Chu, H. Y., Shiue, R. K., & Cheng, S. Y. (2023). The Effect of Homogenization Heat Treatment on 316L Stainless Steel Cast Billet. Materials, 17(1), 232. https://doi.org/10.3390/ma17010232

Vancouver

Chu HY, Shiue RK, Cheng SY. The Effect of Homogenization Heat Treatment on 316L Stainless Steel Cast Billet. Materials. 2023;17(1):232. doi:10.3390/ma17010232

BibTeX
@article{Chu2023,
  author = {Chu, Hung-Yang and Shiue, Ren-Kae and Cheng, Sheng-Yuan},
  title = {The Effect of Homogenization Heat Treatment on 316L Stainless Steel Cast Billet},
  journal = {Materials},
  year = {2023},
  volume = {17},
  number = {1},
  pages = {232},
  doi = {10.3390/ma17010232}
}
Kostenlos starten →