3D Printing of Individualized Microfluidic Chips with DLP-Based Printer
Materials · 31.10.2023 · 16 (21) · 6984
DOI: 10.3390/ma16216984 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 31.10.2023. Verfasst von Jingjiang Qiu und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanics and Safety Engineering, Zhengzhou University, Zhengzhou 450001, China. Die Arbeit wurde bisher 33-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, High-level Foreign Expert Introduction Plan of Henan Province, Henan Postdoctoral Science Foundation.
Abstract (Originalsprache)
Microfluidic chips have shown their potential for applications in fields such as chemistry and biology, and 3D printing is increasingly utilized as the fabrication method for microfluidic chips. To address key issues such as the long printing time for conventional 3D printing of a single chip and the demand for rapid response in individualized microfluidic chip customization, we have optimized the use of DLP (digital light processing) technology, which offers faster printing speeds due to its surface exposure method. In this study, we specifically focused on developing a fast-manufacturing process for directly printing microfluidic chips, addressing the high cost of traditional microfabrication processes and the lengthy production times associated with other 3D printing methods for microfluidic chips. Based on the designed three-dimensional chip model, we utilized a DLP-based printer to directly print two-dimensional and three-dimensional microfluidic chips with photosensitive resin. To overcome the challenge of clogging in printing microchannels, we proposed a printing method that combined an open-channel design with transparent adhesive tape sealing. This method enables the rapid printing of microfluidic chips with complex and intricate microstructures. This research provides a crucial foundation for the development of microfluidic chips in biomedical research.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanics and Safety Engineering, Zhengzhou University, Zhengzhou 450001, China.
- Engineering Technology Research Center of Henan Province for MEMS Manufacturing and Applications, Zhengzhou University, Zhengzhou 450001, China.
- Institute of Intelligent Sensing, Zhengzhou University, Zhengzhou 450001, China.
- Department of Mechanical Engineering, College of Engineering, City University of Hong Kong, Kowloon Tong, Kowloon, Hong Kong, China.
- Industrial Technology Research Institute, Zhengzhou University, Zhengzhou 450001, China.
ORCID-Profile: Jingjiang Qiu, Guochen Qi, Xiang Zhang, Jiong Zhang
Förderung
- National Natural Science Foundation of China
- High-level Foreign Expert Introduction Plan of Henan Province
- Henan Postdoctoral Science Foundation
- Chunhui Plan of Ministry of Education of China
- Open Foundation of the State Laboratory of Fluid Power and Mechatronic Systems
Zitieren
APA
Qiu, J., Li, J., Guo, Z., Zhang, Y., Nie, B., Qi, G., Zhang, X., Zhang, J., & Wei, R. (2023). 3D Printing of Individualized Microfluidic Chips with DLP-Based Printer. Materials, 16(21), 6984. https://doi.org/10.3390/ma16216984
Vancouver
Qiu J, Li J, Guo Z, Zhang Y, Nie B, Qi G, et al. 3D Printing of Individualized Microfluidic Chips with DLP-Based Printer. Materials. 2023;16(21):6984. doi:10.3390/ma16216984
BibTeX
@article{Qiu2023,
author = {Qiu, Jingjiang and Li, Junfu and Guo, Zhongwei and Zhang, Yudong and Nie, Bangbang and Qi, Guochen and Zhang, Xiang and Zhang, Jiong and Wei, Ronghan},
title = {3D Printing of Individualized Microfluidic Chips with DLP-Based Printer},
journal = {Materials},
year = {2023},
volume = {16},
number = {21},
pages = {6984},
doi = {10.3390/ma16216984}
}
EUVIMED