EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure and Mechanical Properties of Stainless Steel/6082 Aluminum Alloy Heterogeneous Laser Welded Joint

Lei Kang, Xin Li, Jing Chen, Yu Zhang, Ting Wang

Materials · 30.10.2023 · 16 (21) · 6958

DOI: 10.3390/ma16216958 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.10.2023. Verfasst von Lei Kang und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Automobile Materials, Jilin University, Changchun 130022, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jilin Advanced Welding Technology Innovation Team for Metal Materials.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The microstructures and mechanical properties of laser penetration welded joints of overlap steel-on-aluminum were investigated. The structure of the intermetallic compound layer without interlayer consists of FeAl and FeAl3 phases. After the Ni-foil was added, the thickness of the intermetallic compound layer and the content of the brittle and hard Al-Fe phase decreased significantly, and some new phases of Al0.9Ni1.1 and FeNi were formed. It was found that the Ni interlayer enhanced the tensile property of the joint by about 40% and decreased the microhardness of the intermetallic compounds, which is attributed to the improvement of the toughness of the welded joint made by the Ni interlayer. It is an effective way to improve the mechanical properties of the laser welding joint by adding a nickel interlayer to improve the metallurgical reaction.

Schlagwörter

Stichwörter der Autor:innen

intermetallic compoundslaser weldingmicrostructuresteel/aluminum welding

Autor:innen und Institutionen

  • State Key Laboratory of Automobile Materials, Jilin University, Changchun 130022, China.
  • Jilin China Department of Materials Science and Engineering, Jilin University, Changchun 130022, China.

Förderung

  • Jilin Advanced Welding Technology Innovation Team for Metal Materials

Zitieren

APA

Kang, L., Li, X., Chen, J., Zhang, Y., & Wang, T. (2023). Microstructure and Mechanical Properties of Stainless Steel/6082 Aluminum Alloy Heterogeneous Laser Welded Joint. Materials, 16(21), 6958. https://doi.org/10.3390/ma16216958

Vancouver

Kang L, Li X, Chen J, Zhang Y, Wang T. Microstructure and Mechanical Properties of Stainless Steel/6082 Aluminum Alloy Heterogeneous Laser Welded Joint. Materials. 2023;16(21):6958. doi:10.3390/ma16216958

BibTeX
@article{Kang2023,
  author = {Kang, Lei and Li, Xin and Chen, Jing and Zhang, Yu and Wang, Ting},
  title = {Microstructure and Mechanical Properties of Stainless Steel/6082 Aluminum Alloy Heterogeneous Laser Welded Joint},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {21},
  pages = {6958},
  doi = {10.3390/ma16216958}
}
Kostenlos starten →