Mechanical Properties and Microstructure of Austenite—Ferrite Duplex Stainless Steel Hybrid (Laser + GMAW) and SAW Welded Joint
Materials · 06.04.2023 · 16 (7) · 2909
DOI: 10.3390/ma16072909 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 06.04.2023. Verfasst von Ryszard Krawczyk und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering and Computer Science, Czestochowa University of Technology, Armii Krajowej 21, 42-201 Czestochowa, Poland. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The purpose of the research was to develop a technology for producing thick-walled duplex steel welded joints. The material used in the research was X2CrNiMoN22 duplex steel in the form of a 15 mm thick plate. The welded joint was produced by the modern, high-performance Hybrid Laser Arc Welding (HLAW) method. The HLAW method involves welding a joint using a laser, the Gas Metal Arc Welding (GMAW) method and the Submerged Arc Welding (SAW) method. The HLAW method was used to make the root pass of the double butt welded joint, while the filler passes were made by the SAW method. The obtained welded joint was subjected to non-destructive and destructive testing. The non-destructive and macroscopic tests allowed the joint to be classified to the quality level B. Microscopic examinations revealed the presence of ferritic–austenitic microstructure in the base material and the weld, with different ferrite content in specific joint areas. The analysed joint had high strength properties (tensile strength (TS) ~ 790 ± 7 MPa) and high ductility of weld metal (~160 ± 4 J) heat-affected zone (~216 ± 26 J), and plasticity (bending angle of 180° with no macrocracks). At the same time, hardness on the cross-section of the welded joint did not exceed 280 HV10.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering and Computer Science, Czestochowa University of Technology, Armii Krajowej 21, 42-201 Czestochowa, Poland.
- Łukasiewicz Research Network Upper Silesian Institute of Technology, K. Miarki 12-14, 44-100 Gliwice, Poland.
- Department of Material Engineering, Czestochowa University of Technology, Armii Krajowej 19, 42-201 Czestochowa, Poland.
ORCID-Profile: Grzegorz Golański
Zitieren
APA
Krawczyk, R., Słania, J., Golański, G., & Pfeifer, T. (2023). Mechanical Properties and Microstructure of Austenite—Ferrite Duplex Stainless Steel Hybrid (Laser + GMAW) and SAW Welded Joint. Materials, 16(7), 2909. https://doi.org/10.3390/ma16072909
Vancouver
Krawczyk R, Słania J, Golański G, Pfeifer T. Mechanical Properties and Microstructure of Austenite—Ferrite Duplex Stainless Steel Hybrid (Laser + GMAW) and SAW Welded Joint. Materials. 2023;16(7):2909. doi:10.3390/ma16072909
BibTeX
@article{Krawczyk2023,
author = {Krawczyk, Ryszard and Słania, Jacek and Golański, Grzegorz and Pfeifer, Tomasz},
title = {Mechanical Properties and Microstructure of Austenite—Ferrite Duplex Stainless Steel Hybrid (Laser + GMAW) and SAW Welded Joint},
journal = {Materials},
year = {2023},
volume = {16},
number = {7},
pages = {2909},
doi = {10.3390/ma16072909}
}
EUVIMED