Microstructure and Fracture Behaviors of Oscillating Laser Welded 5A06 Aluminum Alloy Lock Butt Joint
Applied Sciences · 07.03.2023 · 13 (6) · 3381
DOI: 10.3390/app13063381 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 07.03.2023. Verfasst von Yang Lu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Aviation Science Foundation of China.
Abstract (Originalsprache)
Oscillating laser welding is potential to improve the quality of aluminum alloy joints, but has been seldom addressed on lock butt joint. In this paper, the effects of beam oscillation frequencies (f) on the properties of laser-welded 5A06 aluminum alloy lock butt joints were investigated, especially those at the lock step. In the microstructure, the columnar grain zone (CGZ) near the fusion line narrowed, the porosity was reduced, and the angle between lock step and fusion line increased with the increase of f. Correspondingly, the fracture changed from equiaxed grain zone to heat affected zone (HAZ), and the fracture angle between lock step and crack propagation line from 90° to 45°. The maximum ultimate tensile strength and elongation of oscillating weld reached 308 MPa and 18.2%, respectively, 36.3% and 203.3% higher than non-oscillating weld. The fracture behaviors indicated that the crack always initiated at the lock step, and then preferably propagated to the pores, followed closely by the weaker CGZ, and then the stronger HAZ when CGZ was narrowed enough. Notably, when the pore size was small (
Förderung
- National Natural Science Foundation of China
- Aviation Science Foundation of China
Zitieren
APA
Lu, Y., Lai, J., Pang, J., Li, X., Zhang, C., & Gao, M. (2023). Microstructure and Fracture Behaviors of Oscillating Laser Welded 5A06 Aluminum Alloy Lock Butt Joint. Applied Sciences, 13(6), 3381. https://doi.org/10.3390/app13063381
Vancouver
Lu Y, Lai J, Pang J, Li X, Zhang C, Gao M. Microstructure and Fracture Behaviors of Oscillating Laser Welded 5A06 Aluminum Alloy Lock Butt Joint. Applied Sciences. 2023;13(6):3381. doi:10.3390/app13063381
BibTeX
@article{Lu2023,
author = {Lu, Yang and Lai, Jian and Pang, Junping and Li, Xin and Zhang, Chen and Gao, Ming},
title = {Microstructure and Fracture Behaviors of Oscillating Laser Welded 5A06 Aluminum Alloy Lock Butt Joint},
journal = {Applied Sciences},
year = {2023},
volume = {13},
number = {6},
pages = {3381},
doi = {10.3390/app13063381}
}
EUVIMED