EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Mechanical Heterogeneity on the Structural Integrity of HTPB Propellant Grain

Xiangyang Liu, Buqing Hui, Hui Wang, Hang Chen, Dongmo Zhou iD

Materials · 25.06.2023 · 16 (13) · 4590

DOI: 10.3390/ma16134590 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 25.06.2023. Verfasst von Xiangyang Liu und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechatronic Engineering, North University of China, Taiyuan 030051, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate the structural effects of the mechanical heterogeneity of Hydroxyl-terminated polybutadiene (HTPB) propellant grain under ignition pressurization, a gradient finite element method was proposed to evaluate its structural integrity. The heterogeneous mechanical properties of the propellant grain were constructed and assessed. The results demonstrate that the mechanical properties of the propellant grain are spatially variable when taking into account the effect of the load. The range of variation in the mechanical properties is related to the size of the load and its effect on the mechanical properties of the propellant. Two key parameters that affect the mechanical response of the grain are the non-uniform distribution of the modulus and the damage strain threshold. An increase in the propellant modulus leads to an increase in the stress response and a decrease in the strain response of the propellant grain under ignition pressurization. Meanwhile, an increase in the damage strain threshold improves the propellant’s modulus in the linear elastic stage in a disguised form. This also leads to an increase in the stress response and a decrease in the strain response when the strain response exceeds the damage strain threshold. The safety factor, based on the equivalent strain failure criterion of the grain, directly depends on both the strain response of the propellant grain and the maximum elongation of the propellant. Furthermore, the change in the safety factor of two propellant grains is primarily affected by the maximum elongation of the propellant.

Schlagwörter

Stichwörter der Autor:innen

HTPB propellantgradient finite elementmechanical heterogeneitysafety factorstructural integrity

Autor:innen und Institutionen

  • School of Mechatronic Engineering, North University of China, Taiyuan 030051, China.
  • School of Aerospace Engineering, Beijing Institute of Technology, Beijing 100081, China.

ORCID-Profile: Dongmo Zhou

Zitieren

APA

Liu, X., Hui, B., Wang, H., Chen, H., & Zhou, D. (2023). Effect of Mechanical Heterogeneity on the Structural Integrity of HTPB Propellant Grain. Materials, 16(13), 4590. https://doi.org/10.3390/ma16134590

Vancouver

Liu X, Hui B, Wang H, Chen H, Zhou D. Effect of Mechanical Heterogeneity on the Structural Integrity of HTPB Propellant Grain. Materials. 2023;16(13):4590. doi:10.3390/ma16134590

BibTeX
@article{Liu2023,
  author = {Liu, Xiangyang and Hui, Buqing and Wang, Hui and Chen, Hang and Zhou, Dongmo},
  title = {Effect of Mechanical Heterogeneity on the Structural Integrity of HTPB Propellant Grain},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {13},
  pages = {4590},
  doi = {10.3390/ma16134590}
}
Kostenlos starten →