EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Creep Mechanical Properties of HTPB Solid Propellant

Li Jin iD, Siqi Jia, Ze Zhang, Zicong An iD, Zhenkun Lu

Materials · 09.05.2026 · 19 (10) · 1951

DOI: 10.3390/ma19101951 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.05.2026. Verfasst von Li Jin und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Renewable Energy, Inner Mongolia University of Technology, Ordos 017010, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Strategic Pioneering Science and Technology Project of NJUST in 2024, Ordos City Science and Technology Breakthrough Project: Major Initiatives for Open Competition and Leadership Recruitment in 2025, 2024 Inner Mongolia University of Technology Strategic Pilot Science and Technology Special Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solid rocket propellants based on hydroxyl-terminated polybutadiene (HTPB), in which HTPB acts as the polymeric binder and fuel matrix, are widely used in aerospace propulsion. During storage, transport, and service, these composite energetic materials are exposed to sustained mechanical loads as well as environmental variations, which may induce time-dependent inelastic deformation. Such creep deformation can alter the grain geometry, affect combustion stability, and reduce the structural reliability of rocket motors. In this work, room-temperature tensile creep tests were conducted on an HTPB-based solid propellant under different stress levels. Several viscoelastic and power-law constitutive models were compared, and a composite time-hardening creep model was established to describe the experimental strain–time response. The model was further implemented in Abaqus through a Fortran user subroutine for finite element simulation. The results provide a useful basis for creep deformation assessment, formulation optimization, and structural reliability analysis of HTPB-based propellants.

Schlagwörter

Stichwörter der Autor:innen

constitutive modelcreephydroxyl-terminated polybutadiene (HTPB)simulation

Autor:innen und Institutionen

  • School of Renewable Energy, Inner Mongolia University of Technology, Ordos 017010, China.
  • School of Robot Engineering, Wenzhou University of Technology, Wenzhou 325035, China.

ORCID-Profile: Li Jin, Zicong An

Förderung

  • Strategic Pioneering Science and Technology Project of NJUST in 2024
  • Ordos City Science and Technology Breakthrough Project: Major Initiatives for Open Competition and Leadership Recruitment in 2025
  • 2024 Inner Mongolia University of Technology Strategic Pilot Science and Technology Special Project

Zitieren

APA

Jin, L., Jia, S., Zhang, Z., An, Z., & Lu, Z. (2026). Study on Creep Mechanical Properties of HTPB Solid Propellant. Materials, 19(10), 1951. https://doi.org/10.3390/ma19101951

Vancouver

Jin L, Jia S, Zhang Z, An Z, Lu Z. Study on Creep Mechanical Properties of HTPB Solid Propellant. Materials. 2026;19(10):1951. doi:10.3390/ma19101951

BibTeX
@article{Jin2026,
  author = {Jin, Li and Jia, Siqi and Zhang, Ze and An, Zicong and Lu, Zhenkun},
  title = {Study on Creep Mechanical Properties of HTPB Solid Propellant},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {1951},
  doi = {10.3390/ma19101951}
}
Kostenlos starten →