Effect of Turmeric Staining and Bleaching Treatment on Color Stability and Surface Hardness of Different Dental Composite Resins
Journal of Composites Science · 08.02.2025 · 9 (2) · 77
DOI: 10.3390/jcs9020077 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 08.02.2025. Verfasst von Mitsu Patel und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigated the susceptibility of nine composite resins to turmeric staining, evaluated bleaching efficacy for color recovery, and assessed surface hardness throughout these processes. Disc-shaped specimens (8 mm × 2 mm, n = 3/group) were subjected to daily 20 min turmeric solution immersion for two weeks, followed by two weeks of daily 3 h applications of 16% carbamide peroxide bleaching. Color measurements included spectrophotometric analysis for ΔE values (threshold ΔE > 3.3 for clinical significance) and VITA Classic shade assessment at baseline, post-staining, and post-bleaching intervals. Surface hardness was evaluated using a Vickers hardness tester. Results showed significant color changes in all materials except HA after turmeric exposure, with FS exhibiting the highest staining susceptibility (ΔE = 24.6 ± 2.69) and HA showing minimal change (ΔE = 1.9 ± 0.85). VITA Classic shade evaluation revealed varying patterns; some materials maintained their initial shade designation despite significant ΔE changes (FS, CM), while others showed substantial shade shifts with successful recovery post-bleaching (HA, OM). Bleaching effectiveness varied across materials, with PO, VEP, and FS demonstrating substantial recovery in ΔE values, although FS retained clinically noticeable discoloration post-bleaching (ΔE = 7.6 ± 0.89). Surface hardness analysis revealed three distinct groups: high (80–90 HV: FS, CA, VPO), intermediate (55–70 HV: VEP, OM), and low (40–47 HV: PO, AE, HA, CM). For patients with high exposure to chromogenic foods, such as turmeric, material selection requires careful consideration of staining susceptibility, with HA and OM demonstrating superior color stability and recovery characteristics in this study.
Zitieren
APA
Patel, M., Lee, J., Hayashi, M., Kim, R. H., & Kim, M. (2025). Effect of Turmeric Staining and Bleaching Treatment on Color Stability and Surface Hardness of Different Dental Composite Resins. Journal of Composites Science, 9(2), 77. https://doi.org/10.3390/jcs9020077
Vancouver
Patel M, Lee J, Hayashi M, Kim RH, Kim M. Effect of Turmeric Staining and Bleaching Treatment on Color Stability and Surface Hardness of Different Dental Composite Resins. Journal of Composites Science. 2025;9(2):77. doi:10.3390/jcs9020077
BibTeX
@article{Patel2025,
author = {Patel, Mitsu and Lee, Jimin and Hayashi, Marc and Kim, Reuben H. and Kim, Mijoo},
title = {Effect of Turmeric Staining and Bleaching Treatment on Color Stability and Surface Hardness of Different Dental Composite Resins},
journal = {Journal of Composites Science},
year = {2025},
volume = {9},
number = {2},
pages = {77},
doi = {10.3390/jcs9020077}
}
EUVIMED