Enhancing the Wear Performance of 316L Stainless Steel with Nb2O5 Coatings Deposited via DC Sputtering at Room Temperature under Varied Environmental Conditions
Lubricants · 06.10.2024 · 12 (10) · 345
DOI: 10.3390/lubricants12100345 ↗Kurz gefasst
Fachartikel in der Zeitschrift Lubricants, online erschienen am 06.10.2024. Verfasst von Murilo Oliveira Alves Ferreira und 11 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Council for Scientific and Technological Development (CNPq-Brazil), Foundation for Research Support of the State of Minas Gerais (FAPEMIG-Brazil), Coordination for the Improvement of Higher Education Personnel (CAPES-Brazil).
Abstract (Originalsprache)
Niobium-based oxides have garnered increased attention in recent years for their remarkable enhancement of corrosion resistance, as well as biofunctional properties of various metallic materials, including 316L SS. However, the mechanical properties of these promising coatings have not been fully elucidated. This study investigated how much the environmental conditions (air, artificial saliva, and NaCl solution) impact the wear performance of 316L SS without and with Nb2O5 coatings deposited via the reactive sputtering technique. The results exhibited a notable decrease in friction coefficient (55% in air, 18% in artificial saliva, 10% in 0.9 wt% NaCl solution), wear area (46% in air, 36% in AS, 17.5% in 0.9 wt% NaCl solution), and wear rate (44.0% in air, 19.5% in AS, 12.0% in 0.9 wt% NaCl solution). Ultimately, the results obtained in the present study elucidate the synergistic mechanisms of corrosion and wear in 316L SS containing Nb2O5 coatings, highlighting its significant potential for applications in the biomedical sector.
Förderung
- National Council for Scientific and Technological Development (CNPq-Brazil)
- Foundation for Research Support of the State of Minas Gerais (FAPEMIG-Brazil)
- Coordination for the Improvement of Higher Education Personnel (CAPES-Brazil)
- São Paulo Research Foundation (FAPESP)
Zitieren
APA
Ferreira, M. O. A., Morgado, V. A. F., Santos, K. R. D., Gelamo, R. V., Mariani, F. E., Slade, N. B. L., Morais, M. M., Fortulan, C. A., Galo, R., Jasinevicius, R. G., Pinto, H. C., & Moreto, J. A. (2024). Enhancing the Wear Performance of 316L Stainless Steel with Nb2O5 Coatings Deposited via DC Sputtering at Room Temperature under Varied Environmental Conditions. Lubricants, 12(10), 345. https://doi.org/10.3390/lubricants12100345
Vancouver
Ferreira MOA, Morgado VAF, Santos KRD, Gelamo RV, Mariani FE, Slade NBL, et al. Enhancing the Wear Performance of 316L Stainless Steel with Nb2O5 Coatings Deposited via DC Sputtering at Room Temperature under Varied Environmental Conditions. Lubricants. 2024;12(10):345. doi:10.3390/lubricants12100345
BibTeX
@article{Ferreira2024,
author = {Ferreira, Murilo Oliveira Alves and Morgado, Victor Auricchio Fernandes and Santos, Kauê Ribeiro dos and Gelamo, Rogério Valentim and Mariani, Fábio Edson and Slade, Natália Bueno Leite and Morais, Mateus Mota and Fortulan, Carlos Alberto and Galo, Rodrigo and Jasinevicius, Renato Goulart and Pinto, Haroldo Cavalcanti and Moreto, Jéferson Aparecido},
title = {Enhancing the Wear Performance of 316L Stainless Steel with Nb2O5 Coatings Deposited via DC Sputtering at Room Temperature under Varied Environmental Conditions},
journal = {Lubricants},
year = {2024},
volume = {12},
number = {10},
pages = {345},
doi = {10.3390/lubricants12100345}
}
EUVIMED