EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Stress Distribution in “All-on-Four” Prostheses: A Three-Dimensional Finite Element Analysis

Eduardo Francisco de Souza Faco, Andressa Paschoal Amoroso, Flávia Priscila Pereira iD, Luana Ferreira Oliveira iD, Leandro Lécio de Lima Sousa iD, André Luis da Silva Fabris, Idelmo Rangel Garcia Junior, José Vitor Quinelli Mazaro, Osvaldo Magro Filho

Life · 07.07.2026 · 16 (7) · 1128

DOI: 10.3390/life16071128 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Life, online erschienen am 07.07.2026. Verfasst von Eduardo Francisco de Souza Faco und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Diagnosis and Surgery, School of Dentistry, São Paulo State University (UNESP), Araçatuba 16010-380, SP, Brazil. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The growing demand for implant-supported rehabilitative prosthetic treatments has reinforced the need to optimize biomechanical performance, particularly regarding force distribution. This study aimed to evaluate the stress distribution generated by different configurations of full-arch implant-supported prostheses using three-dimensional finite element analysis. Two mandibular models were created using SolidWorks 2010 (SolidWorks Corp., Waltham, MA, USA) and Rhinoceros® 3D 4.0 (NURBS Modeling for Windows, USA). Each model represented a mandible restored with a full-arch fixed prosthesis supported by external hex implants (4.0 × 13.0 mm; Master, Conexão Sistemas de Prótese, São Paulo, Brazil) placed in the interforaminal region, differing only in implant angulation. Model 1 included four implants positioned perpendicular to the alveolar ridge, whereas Model 2 represented the All-on-Four configuration with distal implants tilted at 30°. The prosthesis was modeled in acrylic resin with a NiCr metal framework. The geometries were exported to FEMAP 11.0 for mesh generation. Axial loading of 300 N was applied bilaterally (75 N per tooth), and oblique loading of 150 N was applied unilaterally (75 N per tooth) on the first premolars and first molars. Obtained using NEiNastran® 9.2 showed that the tilted-implant model exhibited higher stress concentrations under both loading conditions. The All-on-Four configuration generated the highest stress levels, particularly around the distal implants. The null hypothesis of this study was that there would be no difference in stress distribution among full-arch implant-supported prostheses supported by straight implants and those rehabilitated according to the All-on-Four concept with tilted distal implants.

Schlagwörter

Stichwörter der Autor:innen

biomechanicsdental implantsfinite element analysis

Autor:innen und Institutionen

  • Department of Diagnosis and Surgery, School of Dentistry, São Paulo State University (UNESP), Araçatuba 16010-380, SP, Brazil.
  • Department of Dental Materials and Prosthodontics, School of Dentistry, São Paulo State University (UNESP), Araçatuba 16010-380, SP, Brazil.
  • UNIFUNEC-Integrated Colleges of Santa Fé do Sul, Santa Fé do Sul 15775-000, SP, Brazil.
  • Department of Periodontics, Universus Veritas University Guarulhos-UNG, Guarulhos 07023-070, SP, Brazil.

ORCID-Profile: Flávia Priscila Pereira, Luana Ferreira Oliveira, Leandro Lécio de Lima Sousa

Zitieren

APA

Faco, E. F. S., Amoroso, A. P., Pereira, F. P., Oliveira, L. F., Sousa, L. L. L., Fabris, A. L. D. S., Garcia Junior, I. R., Mazaro, J. V. Q., & Filho, O. M. (2026). Evaluation of Stress Distribution in “All-on-Four” Prostheses: A Three-Dimensional Finite Element Analysis. Life, 16(7), 1128. https://doi.org/10.3390/life16071128

Vancouver

Faco EFS, Amoroso AP, Pereira FP, Oliveira LF, Sousa LLL, Fabris ALDS, et al. Evaluation of Stress Distribution in “All-on-Four” Prostheses: A Three-Dimensional Finite Element Analysis. Life. 2026;16(7):1128. doi:10.3390/life16071128

BibTeX
@article{Faco2026,
  author = {Faco, Eduardo Francisco de Souza and Amoroso, Andressa Paschoal and Pereira, Flávia Priscila and Oliveira, Luana Ferreira and Sousa, Leandro Lécio de Lima and Fabris, André Luis da Silva and Garcia Junior, Idelmo Rangel and Mazaro, José Vitor Quinelli and Filho, Osvaldo Magro},
  title = {Evaluation of Stress Distribution in “All-on-Four” Prostheses: A Three-Dimensional Finite Element Analysis},
  journal = {Life},
  year = {2026},
  volume = {16},
  number = {7},
  pages = {1128},
  doi = {10.3390/life16071128}
}
Kostenlos starten →