Hot Cladding of Al–Cu–Mn-Based Secondary Alloy Sheets: A Computational–Experimental Investigation
Journal of Manufacturing and Materials Processing · 14.10.2025 · 9 (10) · 336
DOI: 10.3390/jmmp9100336 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 14.10.2025. Verfasst von Alexander Koshmin und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Moscow Polytechnic University.
Abstract (Originalsprache)
This study investigates the double-sided hot cladding of an experimental Al–2%Cu–1.5%Mn–1%Zn–0.7%Mg–0.4%Fe–0.4%Si alloy with commercially pure aluminum A1050 under combined hot deformation. Finite element modeling was employed to analyze the evolution of shear strains, normal stresses, and flow stresses in the deformation zone during cladding. The results indicate that increasing the degree of reduction significantly alters the distribution and direction of shear strains: at low reductions (20–30%), shear directions in the base and cladding layers coincide, while reductions above 40% induce opposing shear directions. Temperature was identified as the dominant factor affecting normal stress and flow stress differences between layers, whereas deformation magnitude primarily influenced peak stresses at the neutral section of the deformation zone. Experimental validation was conducted over a temperature range of 300–450 °C and relative reductions of 20–60%, demonstrating successful layer bonding in all cases except at low temperatures and reductions (300–375 °C, 20–30%). Based on combined modeling and experimental data, a predictive model for estimating peel strength during hot rolling cladding was developed, offering a robust tool for optimizing process parameters and ensuring reliable interlayer bonding in investigated aluminum alloys.
Förderung
- The Moscow Polytechnic University
Zitieren
APA
Koshmin, A., Zinoviev, A., Khakimova, A., Lukashevich, K., Barkov, R., & Demin, D. (2025). Hot Cladding of Al–Cu–Mn-Based Secondary Alloy Sheets: A Computational–Experimental Investigation. Journal of Manufacturing and Materials Processing, 9(10), 336. https://doi.org/10.3390/jmmp9100336
Vancouver
Koshmin A, Zinoviev A, Khakimova A, Lukashevich K, Barkov R, Demin D. Hot Cladding of Al–Cu–Mn-Based Secondary Alloy Sheets: A Computational–Experimental Investigation. Journal of Manufacturing and Materials Processing. 2025;9(10):336. doi:10.3390/jmmp9100336
BibTeX
@article{Koshmin2025,
author = {Koshmin, Alexander and Zinoviev, Alexander and Khakimova, Anna and Lukashevich, Konstantin and Barkov, Ruslan and Demin, Dmitriy},
title = {Hot Cladding of Al–Cu–Mn-Based Secondary Alloy Sheets: A Computational–Experimental Investigation},
journal = {Journal of Manufacturing and Materials Processing},
year = {2025},
volume = {9},
number = {10},
pages = {336},
doi = {10.3390/jmmp9100336}
}
EUVIMED