Microstructure and Properties of Laser-Remelted Al-Cu-Mn Alloy
Metals · 21.06.2025 · 15 (7) · 693
DOI: 10.3390/met15070693 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 21.06.2025. Verfasst von Jibo Hou und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shanxi Natural Science Fund for Distinguished Young Scholars.
Abstract (Originalsprache)
This article studies the effects of a laser remelting treatment on the microstructure and properties of Al-Cu-Mn alloy surfaces, as well as the effects of a heat treatment process on the microstructure and mechanical properties of the matrix zone and remelting zone. The results showed that the remelting zone structure was mainly composed of equiaxed dendrites and fine columnar dendrites. The α(Al) phase and θ(Al2Cu) phase were greatly refined after laser remelting. The T(Al12CuMn2) phase was completely dissolved into the α(Al) matrix. The hardness of the remelting zone increased significantly with an increase in the height of the molten pool, and the strengthening mechanism was mainly fine grain strengthening and second phase strengthening. For identical aging treatments, the solution treatment at 530 °C for 4 h yielded the highest hardness. Relative to samples aged without prior solution treatment, hardness increased by 80% in the matrix zone and 59.1% in the remelting zone. When the solid solution process was the same, the time to reach peak hardness was shortened when the aging temperature increased, and the hardness of both the matrix zone and remelting zone reached its peak at 175 °C for 8 h of aging. After aging, the friction coefficient of the alloy decreased due to the increase in the strength of the alloy.
Förderung
- National Natural Science Foundation of China
- Shanxi Natural Science Fund for Distinguished Young Scholars
Zitieren
APA
Hou, J., Li, H., Dong, Q., & Zhao, Z. (2025). Microstructure and Properties of Laser-Remelted Al-Cu-Mn Alloy. Metals, 15(7), 693. https://doi.org/10.3390/met15070693
Vancouver
Hou J, Li H, Dong Q, Zhao Z. Microstructure and Properties of Laser-Remelted Al-Cu-Mn Alloy. Metals. 2025;15(7):693. doi:10.3390/met15070693
BibTeX
@article{Hou2025,
author = {Hou, Jibo and Li, Huiru and Dong, Qingnan and Zhao, Zhanyong},
title = {Microstructure and Properties of Laser-Remelted Al-Cu-Mn Alloy},
journal = {Metals},
year = {2025},
volume = {15},
number = {7},
pages = {693},
doi = {10.3390/met15070693}
}
EUVIMED