EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laser Powder Bed Fusion Processing of UNS C64200 Aluminum–Silicon–Bronze

Kenzie A. Timmons, Ali Nasiri, Donald P. Bishop

Journal of Manufacturing and Materials Processing · 30.04.2025 · 9 (5) · 147

DOI: 10.3390/jmmp9050147 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 30.04.2025. Verfasst von Kenzie A. Timmons und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada, Canadian Foundation for Innovation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research focused on developing the processing parameters required to fabricate UNS C64200 aluminum–silicon–bronze (ASB) using laser powder bed fusion (LPBF) additive manufacturing. A full factorial design of experiments (DOE), followed by a central composite DOE, was employed to statistically optimize the as-built density while varying laser power, scan speed, and hatch spacing. Parameter sets that yielded high-density (>99.9%) products were then utilized to manufacture specimens to determine mechanical properties in both the as-built and heat-treated states. The as-built samples exhibited high tensile strength but relatively low ductility and absorbed impact energy, owing to the presence of a mixed α/β’ microstructure. Heat treatment at 620 °C eliminated the martensitic β’ phase, which manifested significant gains in ductility and absorbed energy. As such, the final tensile properties and impact toughness exceeded the Defence Standard minimum requirements for conventionally processed ASB.

Förderung

  • Natural Sciences and Engineering Research Council of Canada
  • Canadian Foundation for Innovation

Zitieren

APA

Timmons, K. A., Nasiri, A., & Bishop, D. P. (2025). Laser Powder Bed Fusion Processing of UNS C64200 Aluminum–Silicon–Bronze. Journal of Manufacturing and Materials Processing, 9(5), 147. https://doi.org/10.3390/jmmp9050147

Vancouver

Timmons KA, Nasiri A, Bishop DP. Laser Powder Bed Fusion Processing of UNS C64200 Aluminum–Silicon–Bronze. Journal of Manufacturing and Materials Processing. 2025;9(5):147. doi:10.3390/jmmp9050147

BibTeX
@article{Timmons2025,
  author = {Timmons, Kenzie A. and Nasiri, Ali and Bishop, Donald P.},
  title = {Laser Powder Bed Fusion Processing of UNS C64200 Aluminum–Silicon–Bronze},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2025},
  volume = {9},
  number = {5},
  pages = {147},
  doi = {10.3390/jmmp9050147}
}
Kostenlos starten →