EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Processing of AZ91D Magnesium Alloy by Laser Powder Bed Fusion

Klára Nopová, Jan Jaroš, Ondřej Červinek, Libor Pantělejev, Stefan Gneiger, Sascha Senck, Daniel Koutný

Applied Sciences · 20.01.2023 · 13 (3) · 1377

DOI: 10.3390/app13031377 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 20.01.2023. Verfasst von Klára Nopová und 6 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: INTERREG V-A Austria–Czech Republic.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Magnesium alloys are perspective materials for use in transportation, aerospace and medical industries, mainly because of their good load-to-weight ratio, biocompatibility and biodegradability. For the effective production of magnesium components by the laser powder bed fusion (LPBF) process, the process parameters with verified mechanical properties need to be determined. In this paper, we prepared bulk samples with a high relative density of AZ91D magnesium alloy. Tensile tests were then performed on LPBF samples to evaluate the mechanical properties. Our results show that the bulk samples achieved a relative density >99%, in multiple planes over the full sample height, while the mechanical properties reached values of YS = 181 MPa, UTS = 305 MPa and A5.65 = 5.2%. The analysis by scanning electron microscope revealed fine β-Mg17Al12 particles in the microstructure, which have a positive effect on the mechanical properties. The chemical composition of magnesium alloy AZ91D changed slightly during processing by LPBF due to the evaporation of the Mg content. However, the resulting composition still corresponds to the range specified by the ASTM standard for the AZ91D alloy.

Förderung

  • INTERREG V-A Austria–Czech Republic

Zitieren

APA

Nopová, K., Jaroš, J., Červinek, O., Pantělejev, L., Gneiger, S., Senck, S., & Koutný, D. (2023). Processing of AZ91D Magnesium Alloy by Laser Powder Bed Fusion. Applied Sciences, 13(3), 1377. https://doi.org/10.3390/app13031377

Vancouver

Nopová K, Jaroš J, Červinek O, Pantělejev L, Gneiger S, Senck S, et al. Processing of AZ91D Magnesium Alloy by Laser Powder Bed Fusion. Applied Sciences. 2023;13(3):1377. doi:10.3390/app13031377

BibTeX
@article{Nopov2023,
  author = {Nopová, Klára and Jaroš, Jan and Červinek, Ondřej and Pantělejev, Libor and Gneiger, Stefan and Senck, Sascha and Koutný, Daniel},
  title = {Processing of AZ91D Magnesium Alloy by Laser Powder Bed Fusion},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {3},
  pages = {1377},
  doi = {10.3390/app13031377}
}
Kostenlos starten →