EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Process Parameters in Electropolishing of SS 316L Utilizing Taguchi Robust Design

Muhammad Kemal Syahputra, Kartika Nur ‘Anisa’, Rizky Astari Rahmania, Farazila Yusof, Pradeep Dixit, Muslim Mahardika, Gunawan Setia Prihandana

Journal of Manufacturing and Materials Processing · 11.04.2025 · 9 (4) · 127

DOI: 10.3390/jmmp9040127 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 11.04.2025. Verfasst von Muhammad Kemal Syahputra und 6 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: SATU Joint Research Scheme, Universitas Airlangga.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In electropolishing, the material removal rate is frequently neglected, as this process is primarily focused on surface finish, and yet, it is crucial for manufacturing metallic sheets. Solutions are required to enhance the material removal rate while maintaining surface quality. This work introduces an electropolishing technique that involves suspending ethanol in an electrolyte solution and employing a magnetic field during machining processes. The Taguchi approach is utilized to determine the ideal process parameters for enhancing the material removal rate of SS 316L electropolishing through a L9 orthogonal array. Pareto analysis of variance (ANOVA) is utilized to examine the four parameters of the machining process: applied voltage, ethanol concentration, machining gap variation, and the magnetic field of the electrolyte. The results demonstrate that the applied voltage, the incorporation of ethanol in electropolishing, and a reduced machining gap significantly increase the material removal rate; however, the introduction of a magnetic field did not notably increase the material removal rate.

Förderung

  • SATU Joint Research Scheme, Universitas Airlangga

Zitieren

APA

Syahputra, M. K., ‘Anisa’, K. N., Rahmania, R. A., Yusof, F., Dixit, P., Mahardika, M., & Prihandana, G. S. (2025). Optimization of Process Parameters in Electropolishing of SS 316L Utilizing Taguchi Robust Design. Journal of Manufacturing and Materials Processing, 9(4), 127. https://doi.org/10.3390/jmmp9040127

Vancouver

Syahputra MK, ‘Anisa’ KN, Rahmania RA, Yusof F, Dixit P, Mahardika M, et al. Optimization of Process Parameters in Electropolishing of SS 316L Utilizing Taguchi Robust Design. Journal of Manufacturing and Materials Processing. 2025;9(4):127. doi:10.3390/jmmp9040127

BibTeX
@article{Syahputra2025,
  author = {Syahputra, Muhammad Kemal and ‘Anisa’, Kartika Nur and Rahmania, Rizky Astari and Yusof, Farazila and Dixit, Pradeep and Mahardika, Muslim and Prihandana, Gunawan Setia},
  title = {Optimization of Process Parameters in Electropolishing of SS 316L Utilizing Taguchi Robust Design},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2025},
  volume = {9},
  number = {4},
  pages = {127},
  doi = {10.3390/jmmp9040127}
}
Kostenlos starten →