EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Robust Optimization of GMAW Parameters in 6063–T5 Aluminium Welds Using Taguchi Design, ANOVA, and Monte Carlo Simulation

José L Meseguer-Valdenebro iD, Eusebio José Martínez Conesa iD, Diego Vergara iD

Materials · 10.06.2026 · 19 (12) · 2499

DOI: 10.3390/ma19122499 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.06.2026. Verfasst von José L Meseguer-Valdenebro und 2 weiteren Autor:innen. Beteiligte Einrichtung: Escuela Técnica Superior de Ingenieros Industriales, Universidad Politécnica de Cartagena, Member of European University of Technology (EUT+), c/Dr. …. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the influence of Gas Metal Arc Welding (GMAW) parameters on the elemental composition and hardness of 6063–T5 aluminum alloy welds. Power, welding speed, and bevel spacing were evaluated using Taguchi’s L9 design to quantify their effects on magnesium and silicon contents and on weld hardness. ANOVA revealed that welding power is the only statistically significant factor governing the incorporation of Mg and Si into the weld metal, whereas no welding parameter showed a statistically significant direct effect on hardness within the investigated range. Nevertheless, an inverse relationship was observed between Mg–Si content and weld hardness, indicating that increased precipitation is associated with lower hardness values. Regression models derived for Mg and Si content were further combined with a Monte Carlo simulation comprising 100,000 iterations, enabling a probabilistic assessment of process robustness. The stochastic analysis confirmed the dominant influence of power on elemental composition and identified a robust operational window ensuring high hardness and controlled Mg–Si levels. The optimal conditions predicted by Taguchi (1596 W, 11.5 mm/s, 1.2 mm) were found to lie within the high-probability region obtained through Monte Carlo simulation. The combined use of Taguchi analysis, ANOVA, regression modelling, and Monte Carlo simulation enabled the evaluation of both process performance and robustness under parameter variability.

Schlagwörter

Stichwörter der Autor:innen

ANOVAL9MontecarloTaguchialuminiumhardnesssimulationweld

Autor:innen und Institutionen

  • Escuela Técnica Superior de Ingenieros Industriales, Universidad Politécnica de Cartagena, Member of European University of Technology (EUT+), c/Dr. Fleming s/n, 30201 Cartagena, Spain.
  • ETS de Arquitectura y Edificación, Universidad Politécnica de Cartagena, Member of European University of Technology (EUT+), Edificio CIM, Calle Real, 3, 30201 Cartagena, Spain.
  • Technology, Instruction and Design in Engineering and Education Research Group (TiDEE.rg), Facultad de Ciencias y Artes, Universidad Católica de Ávila (UCAV), Calle Canteros s/n, 05005 Ávila, Spain.

ORCID-Profile: José L Meseguer-Valdenebro, Eusebio José Martínez Conesa, Diego Vergara

Zitieren

APA

Meseguer-Valdenebro, J. L., Martínez Conesa, E. J., & Vergara, D. (2026). Robust Optimization of GMAW Parameters in 6063–T5 Aluminium Welds Using Taguchi Design, ANOVA, and Monte Carlo Simulation. Materials, 19(12), 2499. https://doi.org/10.3390/ma19122499

Vancouver

Meseguer-Valdenebro JL, Martínez Conesa EJ, Vergara D. Robust Optimization of GMAW Parameters in 6063–T5 Aluminium Welds Using Taguchi Design, ANOVA, and Monte Carlo Simulation. Materials. 2026;19(12):2499. doi:10.3390/ma19122499

BibTeX
@article{MeseguerValdenebro2026,
  author = {Meseguer-Valdenebro, José L and Martínez Conesa, Eusebio José and Vergara, Diego},
  title = {Robust Optimization of GMAW Parameters in 6063–T5 Aluminium Welds Using Taguchi Design, ANOVA, and Monte Carlo Simulation},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2499},
  doi = {10.3390/ma19122499}
}
Kostenlos starten →