EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Downstream Process Combinations on Surface Integrity in Wire EDM of Fir-Tree Slots for Turbine Discs

Daniel Schulze Brock, Marco Baumeler, Marco Boccadoro, Timm Axt-Petersen, Tim Herrig, Andreas Klink, Thomas Bergs

Journal of Manufacturing and Materials Processing · 02.11.2026 · 10 (11) · 478

DOI: 10.3390/jmmp10110478 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 02.11.2026. Verfasst von Daniel Schulze Brock und 6 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agie Charmilles SA..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The manufacture of fir-tree slots in nickel-based superalloy turbine discs places stringent demands on surface integrity, as the resulting surface roughness, white layer thickness, and residual stress state directly influence the fatigue life of safety-critical rotating components. Wire electrical discharge machining (WEDM) offers a geometrically flexible, almost force-free alternative to conventional broaching for this application, but its thermal material removal mechanism introduces tensile residual stresses and a white layer into the workpiece. This study investigates the surface integrity achievable with current WEDM cutting strategies and evaluates the potential of post-processing treatments to further improve surface conditions. To this end, the influences of chemical etching, wet blasting, clean blasting, and shot peening at two intensity levels, as well as selected process combinations, were systematically examined. Surface integrity was characterised by surface roughness, white layer thickness using three complementary evaluation methods and residual stress depth profiles measured by X-ray diffraction. Wet blasting shows considerable potential for improving surface integrity after WEDM.

Förderung

  • Agie Charmilles SA.

Zitieren

APA

Brock, D. S., Baumeler, M., Boccadoro, M., Axt-Petersen, T., Herrig, T., Klink, A., & Bergs, T. (2026). Influence of Downstream Process Combinations on Surface Integrity in Wire EDM of Fir-Tree Slots for Turbine Discs. Journal of Manufacturing and Materials Processing, 10(11), 478. https://doi.org/10.3390/jmmp10110478

Vancouver

Brock DS, Baumeler M, Boccadoro M, Axt-Petersen T, Herrig T, Klink A, et al. Influence of Downstream Process Combinations on Surface Integrity in Wire EDM of Fir-Tree Slots for Turbine Discs. Journal of Manufacturing and Materials Processing. 2026;10(11):478. doi:10.3390/jmmp10110478

BibTeX
@article{Brock2026,
  author = {Brock, Daniel Schulze and Baumeler, Marco and Boccadoro, Marco and Axt-Petersen, Timm and Herrig, Tim and Klink, Andreas and Bergs, Thomas},
  title = {Influence of Downstream Process Combinations on Surface Integrity in Wire EDM of Fir-Tree Slots for Turbine Discs},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {11},
  pages = {478},
  doi = {10.3390/jmmp10110478}
}
Kostenlos starten →