The Review of Current and Proposed Methods of Manufacturing Fir Tree Slots of Turbine Aero Engine Discs
Materials · 21.07.2023 · 16 (14) · 5143
DOI: 10.3390/ma16145143 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 21.07.2023. Verfasst von Jarosław Buk und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering and Aeronautics, Department of Manufacturing Techniques and Automation, Rzeszow University of Technology, 35-959 Rz…. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 132 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This review article presents a summary of currently used and proposed methods of manufacturing fir tree slots of discs in turbine engines. The production of aircraft, including aircraft engines during times of overlapping global economic crises related to the COVID-19 pandemic or the war in Eastern Europe requires a quick response to the changing numbers of passengers and cargo. Similarly, the aviation industry must adapt to these conditions, and thus utilize flexible production methods allowing for a quick change in the design or type of a given part. Due to the constant adoption of new materials for the most critical aero engine parts and the necessity of complying with environmental regulations, it is necessary to search for new methods of manufacturing these parts, including fir tree slots. As an alternative to currently used expensive and energy-intensive broaching, many manufacturers try to implement creep feed grinding CFG or contour milling. However, other manufacturing methods, thus far rarely used for crucial machine parts such as WEDM, ECDM or AWJ, are gaining more and more popularity in the aviation industry. This article presents the advantages and shortcomings of these methods in the context of manufacturing fir tree slots.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering and Aeronautics, Department of Manufacturing Techniques and Automation, Rzeszow University of Technology, 35-959 Rzeszow, Poland.
- Faculty of Mechanical Engineering and Aeronautics, Department of Materials Science, Rzeszow University of Technology, 35-959 Rzeszow, Poland.
ORCID-Profile: Jarosław Buk, Paweł Sułkowicz, Dariusz Szeliga
Zitieren
APA
Buk, J., Sułkowicz, P., & Szeliga, D. (2023). The Review of Current and Proposed Methods of Manufacturing Fir Tree Slots of Turbine Aero Engine Discs. Materials, 16(14), 5143. https://doi.org/10.3390/ma16145143
Vancouver
Buk J, Sułkowicz P, Szeliga D. The Review of Current and Proposed Methods of Manufacturing Fir Tree Slots of Turbine Aero Engine Discs. Materials. 2023;16(14):5143. doi:10.3390/ma16145143
BibTeX
@article{Buk2023,
author = {Buk, Jarosław and Sułkowicz, Paweł and Szeliga, Dariusz},
title = {The Review of Current and Proposed Methods of Manufacturing Fir Tree Slots of Turbine Aero Engine Discs},
journal = {Materials},
year = {2023},
volume = {16},
number = {14},
pages = {5143},
doi = {10.3390/ma16145143}
}
EUVIMED