EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Varying Airborne-Particle Abrasion Angles on Surface Properties and Flexural Strength of Feldspar Ceramic

Valerie Lankes, Andrea Coldea iD, John Meinen iD, Bogna Stawarczyk iD

Journal of Functional Biomaterials · 26.07.2026 · 17 (8) · 358

DOI: 10.3390/jfb17080358 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 26.07.2026. Verfasst von Valerie Lankes und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthetic Dentistry, LMU University Hospital, LMU Medizin, Ludwig-Maximilians-Universität München, Goethestraße 70, 80336 Munich, Germ…. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the effects of airborne-particle abrasion angle and nozzle geometry on the surface free energy (SFE), surface roughness (Ra), and flexural strength (FS) of a feldspar ceramic. A total of 70 feldspar ceramic substrates were assigned to seven groups (n = 10). Six groups were air-abraded with 50 µm Al2O3 at 0.05 MPa for 10 s using a conventional nozzle at 20°, 45°, 70°, or 90°, or an experimental conical nozzle at 45° or 90°. The control group underwent hydrofluoric acid etching for 60 s. One-way ANOVA with partial eta-squared (ηp2) was performed, followed by Scheffé post hoc tests. Treatment significantly affected SFE and Ra (p < 0.001). The 20° conventional-nozzle group showed the lowest SFE and Ra values (38.3 ± 11.3 mJ/m2 and 0.514 ± 0.033 µm, respectively). At 45°, the conventional nozzle produced higher SFE than the experimental nozzle, whereas at 90°, the experimental nozzle produced higher Ra. Mean FS ranged from 121 ± 8.5 to 131 ± 8.0 MPa, without significant differences among the groups (p = 0.074). Under the investigated low-pressure conditions, abrasion angle and nozzle geometry altered surface properties without a statistically detectable reduction in FS. Bond strength, aging durability, and clinical performance were not assessed. Therefore, the present findings alone do not justify a recommendation for replacing hydrofluoric-acid etching with airborne-particle abrasion.

Schlagwörter

Stichwörter der Autor:innen

airborne-particle abrasion anglealumina powderfeldspar ceramicflexural strengthsurface free energysurface roughness

Autor:innen und Institutionen

  • Department of Prosthetic Dentistry, LMU University Hospital, LMU Medizin, Ludwig-Maximilians-Universität München, Goethestraße 70, 80336 Munich, Germany.
  • Biomaterials and Technology, Department Research, University Center for Dental Medicine Basel UZB, University of Basel, Mattenstrasse 40, CH-4058 Basel, Switzerland.

ORCID-Profile: Andrea Coldea, John Meinen, Bogna Stawarczyk

Zitieren

APA

Lankes, V., Coldea, A., Meinen, J., & Stawarczyk, B. (2026). Influence of Varying Airborne-Particle Abrasion Angles on Surface Properties and Flexural Strength of Feldspar Ceramic. Journal of Functional Biomaterials, 17(8), 358. https://doi.org/10.3390/jfb17080358

Vancouver

Lankes V, Coldea A, Meinen J, Stawarczyk B. Influence of Varying Airborne-Particle Abrasion Angles on Surface Properties and Flexural Strength of Feldspar Ceramic. Journal of Functional Biomaterials. 2026;17(8):358. doi:10.3390/jfb17080358

BibTeX
@article{Lankes2026,
  author = {Lankes, Valerie and Coldea, Andrea and Meinen, John and Stawarczyk, Bogna},
  title = {Influence of Varying Airborne-Particle Abrasion Angles on Surface Properties and Flexural Strength of Feldspar Ceramic},
  journal = {Journal of Functional Biomaterials},
  year = {2026},
  volume = {17},
  number = {8},
  pages = {358},
  doi = {10.3390/jfb17080358}
}
Kostenlos starten →