Influence of cleaning methods on zirconia ceramic bonding with long-elapsed time post-airborne-particle abrasion
Journal of Prosthodontic Research · 2025 · 69 (4) · 595-602
DOI: 10.2186/jpr.jpr_d_24_00273 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Prosthodontic Research, 2025. Verfasst von Majed Al-Akhali und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Propaedeutics and Dental Materials, Dental School, Christian-Albrechts University, Kiel, Germany. Hauptthemen laut MEDLINE: Zirconium, Dental Bonding, Ceramics, Dental Etching. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 50 Literaturangaben.
Abstract (Originalsprache)
PURPOSE: To evaluate the influence of cleaning methods on bonding to zirconia ceramic over a long period after airborne-particle abrasion (APA). METHODS: A total of 140 disc-shaped zirconia specimens were divided into five groups based on the cleaning methods after a 72-hour delay between APA and bonding: A-(alcohol), V-(Ivoclean), K-(Katana Cleaner), P2-(Clearfil Ceramic Primer Plus after 72 hours), and P1-(Clearfil Ceramic Primer Plus directly after APA). The specimens were APA-treated with 50-µm alumina particles (Al2O3) and stored at room temperature for 72 hours (n=28/group). Surface free energy (SFE) was measured for 12 specimens per group using a goniometer. For each group, 16 Plexiglas tubes filled with composite resin were bonded to zirconia specimens using a self-adhesive luting resin. Tensile bond strength (TBS) was tested for subgroups of eight specimens after 3 days of water storage and 150 days with 37500 thermal cycles. Failure modes were categorized as adhesive or cohesive using light microscopy. RESULTS: SFE increased significantly in groups V (68.4 mN/m) and A (61.8 mN/m) (P ≤ 0.05), but decreased in group K (33.1 mN/m) (P ≤ 0.05). TBS after 3 days of water storage ranged from 60.7 MPa in group A to 51.6 MPa in group P2 without significant difference between the tested groups (P > 0.05), and after 150 days with thermocycling, it ranged from (45.4 MPa) in group K to 33.9 MPa in group P2 with a significant difference between groups K and P2 (P ≤ 0.05). CONCLUSIONS: Cleaning significantly affected the strength and durability of bonding in non-retentive zirconia restorations when there was a considerable time gap between APA and bonding.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Prosthodontics, Propaedeutics and Dental Materials, Dental School, Christian-Albrechts University, Kiel, Germany.
- Department of Prosthodontics, College of Dentistry, Ibb University, Ibb, Yemen.
- Department of Restorative and Prosthetic Dental Sciences, College of Dentistry, Dar Al Uloom University, Riyadh, Saudi Arabia.
- Faculty of Dentistry, October University for Modern Sciences and Arts, Cairo, Egypt.
Zitieren
APA
Al-Akhali, M., Al-Dobaei, E., Samran, A., Hashem, A. W., Wille, S., & Kern, M. (2025). Influence of cleaning methods on zirconia ceramic bonding with long-elapsed time post-airborne-particle abrasion. Journal of Prosthodontic Research, 69(4), 595-602. https://doi.org/10.2186/jpr.jpr_d_24_00273
Vancouver
Al-Akhali M, Al-Dobaei E, Samran A, Hashem AW, Wille S, Kern M. Influence of cleaning methods on zirconia ceramic bonding with long-elapsed time post-airborne-particle abrasion. Journal of Prosthodontic Research. 2025;69(4):595-602. doi:10.2186/jpr.jpr_d_24_00273
BibTeX
@article{AlAkhali2025,
author = {Al-Akhali, Majed and Al-Dobaei, Eglal and Samran, Abdulaziz and Hashem, Ahmed Wagdy and Wille, Sebastian and Kern, Matthias},
title = {Influence of cleaning methods on zirconia ceramic bonding with long-elapsed time post-airborne-particle abrasion},
journal = {Journal of Prosthodontic Research},
year = {2025},
volume = {69},
number = {4},
pages = {595--602},
doi = {10.2186/jpr.jpr_d_24_00273}
}
EUVIMED