EUVIMEDEUVIMED entdecken
Crossref

Airborne-Particle Abrasion Improves Surface Roughness and Bond Strength of Glass Fibre Posts with Different Compositions

Ana Beatriz Bardasi Solcia iD, Joissi Ferrari Zaniboni iD, João Felipe Besegato iD, José Rodolfo Verbicário iD, Milton Carlos Kuga iD, Edson Alves de Campos iD

European Endodontic Journal · 06.11.2026

DOI: 10.65717/eej.2026.26114 ↗

Kurz gefasst

Fachartikel in der Zeitschrift European Endodontic Journal, online erschienen am 06.11.2026. Verfasst von Ana Beatriz Bardasi Solcia und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Restorative Dentistry, School of Dentistry, São Paulo State University - UNESP, São Paulo, Brazil.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

To evaluate the effect of resin matrix composition (epoxy or methacrylate) and surface treatment of glass fibre posts on their surface roughness and bond strength to root dentine.

Methods

One hundred twenty bovine roots were standardised and randomly distributed into 6 experimental groups (n = 20/group) according to the resin matrix composition of the glass fibre posts (epoxy [Ep] or methacrylate [Me]) and the surface treatment performed (control [CO], silanisation [SI], or airborne-particle abrasion [AA]): Ep-CO; Ep-SI, Ep-AA; Me-CO; Me-SI and Me-AA. Surface roughness was quantified using contact profilometry, while pull-out bond strength (in newtons) was evaluated after 24 hours and 6 months of water storage. Failure modes were assessed under stereomicroscopy. Data were statistically analysed by 2-way analysis of variance (ANOVA) for surface roughness and 3-way ANOVA for pull-out bond strength, followed by Tukey’s post hoc test (α = 0.05). Failure mode distribution was analysed descriptively.

Results

Regardless of fibre post composition, AA significantly increased surface roughness compared with the CO and SI groups (P .05).

Schlagwörter

Stichwörter der Autor:innen

Airborne-particle abrasionbond strengthglass fibre postsurface roughness

Autor:innen und Institutionen

  • Department of Restorative Dentistry, School of Dentistry, São Paulo State University - UNESP, São Paulo, Brazil.
  • Department of Restorative Dentistry, School of Dentistry of Ribeirão Preto, University of São Paulo (USP), São Paulo, Brazil.
  • School of Dentistry (FAODO), Federal University of Mato Grosso do Sul (UFMS), Mato Grosso do Sul, Brazil.

ORCID-Profile: Ana Beatriz Bardasi Solcia, Joissi Ferrari Zaniboni, João Felipe Besegato, José Rodolfo Verbicário, Milton Carlos Kuga, Edson Alves de Campos

Zitieren

APA

Solcia, A. B. B., Zaniboni, J. F., Besegato, J. F., Verbicário, J. R., Kuga, M. C., & de Campos, E. A. (2026). Airborne-Particle Abrasion Improves Surface Roughness and Bond Strength of Glass Fibre Posts with Different Compositions. European Endodontic Journal. https://doi.org/10.65717/eej.2026.26114

Vancouver

Solcia ABB, Zaniboni JF, Besegato JF, Verbicário JR, Kuga MC, de Campos EA. Airborne-Particle Abrasion Improves Surface Roughness and Bond Strength of Glass Fibre Posts with Different Compositions. European Endodontic Journal. 2026. doi:10.65717/eej.2026.26114

BibTeX
@article{Solcia2026,
  author = {Solcia, Ana Beatriz Bardasi and Zaniboni, Joissi Ferrari and Besegato, João Felipe and Verbicário, José Rodolfo and Kuga, Milton Carlos and de Campos, Edson Alves},
  title = {Airborne-Particle Abrasion Improves Surface Roughness and Bond Strength of Glass Fibre Posts with Different Compositions},
  journal = {European Endodontic Journal},
  year = {2026},
  doi = {10.65717/eej.2026.26114}
}
Kostenlos starten →