EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Geometric Accuracy of 3D-Printed Composite Dental Restorations Compared with the Original STL Design

Tommaso Rossi iD, Giulia Pascoletti iD, Michele Calì iD, Giuliana Baiamonte iD, Fulvia Concetta Rita Monaco iD, Elisabetta Maria Zanetti iD, Alberto Audenino iD, Gianpaolo Serino iD, Bartolomeo Coppola iD, Andrea Messina iD, Nicola Scotti iD

Journal of Functional Biomaterials · 19.05.2026 · 17 (5) · 251

DOI: 10.3390/jfb17050251 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 19.05.2026. Verfasst von Tommaso Rossi und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Surgical Sciences, Dental School Lingotto, University of Turin, 10126 Turin, Italy. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) enables customized, efficient restorative workflows, though the accuracy of 3D-printed restorations may be compromised by polymerization, sintering shrinkage, and post-processing. This study evaluated the geometric accuracy of 3D-printed partial restorations compared with the computer-aided design (CAD) reference. The null hypothesis stated that no significant differences would be found between Varseo Smile Crownplus (by BEGO, Italy) and IRIXMax (by DWS System, Italy) materials, which are printed and cured with different technologies. A model was prepared for an overlay and designed with a 1.5 mm uniform thickness. Restorations were produced in two groups with two different printing processes: DLP (digital light processing)-printed Varseo Smile Crownplus and SLA (stereolithography)-printed IRIXMax. Six samples per group were printed at 90° orientation and scanned. Meshes were aligned to the master geometry via pre-alignment and ICP (Iterative Closest Point) registration. Deviations were quantified in CloudCompare using mean, standard deviation (SD), and 90th percentile values. IRIXMax showed the lowest deviations from the ideal geometry, while Varseo Smile Crownplus exhibited greater variability. Pairwise comparisons found IRIXMax significantly more accurate than Varseo Smile Crownplus. Color maps confirmed material-specific deviation patterns. IRIXMax provided the highest geometric accuracy. Material-specific calibration is essential for reliable 3D-printed definitive restorations.

Schlagwörter

Stichwörter der Autor:innen

3D printingdental restorationsdeviation analysis geometric accuracyinternal gapmarginal fitresin-based compositestrueness

Autor:innen und Institutionen

  • Department of Surgical Sciences, Dental School Lingotto, University of Turin, 10126 Turin, Italy.
  • Department of Engineering, University of Perugia, Via Duranti 93, 06125 Perugia, Italy.
  • Electric, Electronics and Computer Engineering Department, University of Catania, 95125 Catania, Italy.
  • Department of Mechanical and Aerospace Engineering, Politecnico di Torino, 10129 Turin, Italy.
  • Department of Applied Science and Technology (DISAT), Politecnico di Torino, 10129 Turin, Italy.

ORCID-Profile: Tommaso Rossi, Giulia Pascoletti, Michele Calì, Giuliana Baiamonte, Fulvia Concetta Rita Monaco, Elisabetta Maria Zanetti, Alberto Audenino, Gianpaolo Serino, Bartolomeo Coppola, Andrea Messina, Nicola Scotti

Förderung

  • European Union

Zitieren

APA

Rossi, T., Pascoletti, G., Calì, M., Baiamonte, G., Monaco, F. C. R., Zanetti, E. M., Audenino, A., Serino, G., Coppola, B., Messina, A., & Scotti, N. (2026). Geometric Accuracy of 3D-Printed Composite Dental Restorations Compared with the Original STL Design. Journal of Functional Biomaterials, 17(5), 251. https://doi.org/10.3390/jfb17050251

Vancouver

Rossi T, Pascoletti G, Calì M, Baiamonte G, Monaco FCR, Zanetti EM, et al. Geometric Accuracy of 3D-Printed Composite Dental Restorations Compared with the Original STL Design. Journal of Functional Biomaterials. 2026;17(5):251. doi:10.3390/jfb17050251

BibTeX
@article{Rossi2026,
  author = {Rossi, Tommaso and Pascoletti, Giulia and Calì, Michele and Baiamonte, Giuliana and Monaco, Fulvia Concetta Rita and Zanetti, Elisabetta Maria and Audenino, Alberto and Serino, Gianpaolo and Coppola, Bartolomeo and Messina, Andrea and Scotti, Nicola},
  title = {Geometric Accuracy of 3D-Printed Composite Dental Restorations Compared with the Original STL Design},
  journal = {Journal of Functional Biomaterials},
  year = {2026},
  volume = {17},
  number = {5},
  pages = {251},
  doi = {10.3390/jfb17050251}
}
Kostenlos starten →