EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Color Stability, Gloss Retention, and Surface Roughness of 3D-Printed versus Indirect Prefabricated Veneers

Arwa Daghrery iD

Journal of Functional Biomaterials · 28.09.2023 · 14 (10) · 492

DOI: 10.3390/jfb14100492 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 28.09.2023. Verfasst von Arwa Daghrery. Beteiligte Einrichtung: Department of Restorative Dental Sciences, College of Dentistry, Jazan University, Jazan 45142, Saudi Arabia. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Ministry of Education in Saudi Arabia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The long-term color stability and surface properties of anterior laminate veneers are among the crucial factors affecting the clinical longevity of aesthetic restorations. Novel 3D-printed materials are being introduced as definitive restorative treatment. In light of the existing variety of indirect yet minimally invasive composite resin veneers, research on their surface properties is warranted. This in vitro study evaluated the effect of artificial aging by immersion in different staining solutions on the color changes, gloss, and surface roughness (Ra) of 3D-printed veneers compared to the prefabricated resin composite veneer systems (PRCVs) manufactured by Componeer and Edelweiss. Moreover, this study compared the effects of two methods for stain removal: repolishing with Sof-Lex disks and in-office bleaching with 40% hydrogen peroxide. The veneers (n = 24) were randomly divided according to the immersion solutions used, i.e., tea and coffee. Colorimetric measurements, surface roughness, and surface gloss were determined before and after staining and surface treatment with either in-office bleaching or surface polishing. The data were statistically analyzed using two-way ANOVA followed by the Tukey’s post hoc test (α = 0.05). Artificial aging with immersion in staining solutions led to significant color changes, increased surface roughness, and gloss reduction in all materials (p < 0.05). The 3D-printed veneers showed higher ΔE values (coffee = 10.112 ± 0.141) and (tea = 10.689 ± 0.771) compared to baseline after 7 days of aging. The 3D-printed veneers had a statistically significant surface roughness Ra (0.574 µm ± 0.073). The gloss was >70% in all groups at baseline; these values dropped in all groups after 7 days of artificial aging. After the stain-removing procedures, the ΔE values decreased in all tested veneers. That being said, they failed to return to the baseline values, and both stain-removing methods were found to have an adverse effect on surface roughness and gloss retention in all tested veneers.

Schlagwörter

Stichwörter der Autor:innen

artificial agingcolorglossprintingroughnessveneers

Autor:innen und Institutionen

  • Department of Restorative Dental Sciences, College of Dentistry, Jazan University, Jazan 45142, Saudi Arabia.

ORCID-Profile: Arwa Daghrery

Förderung

  • Ministry of Education
  • Ministry of Education in Saudi Arabia

Zitieren

APA

Daghrery, A. (2023). Color Stability, Gloss Retention, and Surface Roughness of 3D-Printed versus Indirect Prefabricated Veneers. Journal of Functional Biomaterials, 14(10), 492. https://doi.org/10.3390/jfb14100492

Vancouver

Daghrery A. Color Stability, Gloss Retention, and Surface Roughness of 3D-Printed versus Indirect Prefabricated Veneers. Journal of Functional Biomaterials. 2023;14(10):492. doi:10.3390/jfb14100492

BibTeX
@article{Daghrery2023,
  author = {Daghrery, Arwa},
  title = {Color Stability, Gloss Retention, and Surface Roughness of 3D-Printed versus Indirect Prefabricated Veneers},
  journal = {Journal of Functional Biomaterials},
  year = {2023},
  volume = {14},
  number = {10},
  pages = {492},
  doi = {10.3390/jfb14100492}
}
Kostenlos starten →