Evaluation of Surface Roughness of 3D Printed Objects
3D Printing and Additive Manufacturing · 2025-12 · 12 (6) · 697-709
DOI: 10.1089/3dp.2024.0144 ↗Kurz gefasst
Fachartikel in der Zeitschrift 3D Printing and Additive Manufacturing, online erschienen am 19.01.2026. Verfasst von Alaa Almansoori und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 47 Literaturangaben.
Abstract (Originalsprache)
Lower surface roughness is a good quality indicator as it is directly related to mechanical strength, permeability, and aesthetic properties of printed three-dimensional (3D) objects. This study evaluated the effect of nanoclay and laser power on the surface properties of laser-sintered (LS) objects. LS specimens created from polyamide 12 (PA12) and composites were tested for surface roughness on top and bottom surfaces. Scanning electron microscopy with surface roughness tester were used to evaluate the surface morphology like surface roughness, melt-ability, and homogeneity of dispersion of nanoclay in the LS fused polymer matrix. This study’s findings demonstrate the importance of nanoclay as a filler in LS polymer-based 3D objects. Nanoclay particles interact with polymer particles via physical and chemical cross-links. These interactions increase the packing density of particles in 3D objects, which increases their surface smoothness. Thus, this study demonstrated that the addition of nanoclay to the LS polymeric powder with optimized laser power exhibited improved surface properties with an expectation to emerge new applications.
Zitieren
APA
Almansoori, A., Al-Jumaili, S. K., Mohammad, H. M., & Alkaron, W. (2025). Evaluation of Surface Roughness of 3D Printed Objects. 3D Printing and Additive Manufacturing, 12(6), 697-709. https://doi.org/10.1089/3dp.2024.0144
Vancouver
Almansoori A, Al-Jumaili SK, Mohammad HM, Alkaron W. Evaluation of Surface Roughness of 3D Printed Objects. 3D Printing and Additive Manufacturing. 2025;12(6):697-709. doi:10.1089/3dp.2024.0144
BibTeX
@article{Almansoori2025,
author = {Almansoori, Alaa and Al-Jumaili, Safaa Kh. and Mohammad, Haider M. and Alkaron, Wasan},
title = {Evaluation of Surface Roughness of 3D Printed Objects},
journal = {3D Printing and Additive Manufacturing},
year = {2025},
volume = {12},
number = {6},
pages = {697--709},
doi = {10.1089/3dp.2024.0144}
}
EUVIMED